@example
@code{/* Prefix @emph{pop3_} is reserve */}
@code{#include <mailutils/pop3.h>}

@end example

The Post Office Protocol Version 3 (POP3) purpose is to permit a client to
download a maildrop from a remote server.  It does not provide complexe or
extensive operation on the maildrop.

@example

               +----------+
+--------+     |          |      +---------------+       /-------\
| Client | --->| Server   | ---> | AUTHORIZATION |--+--->| Close |<-+
+--------+     | Greeting |      +---------------+  |    \-------/  |
               |          |    +--------------------+               |
               +----------+    |                                    |
                               |                                    |
                               |  +-------------+      +--------+   |
                               +->| TRANSACTION |----->| UPDATE |---+
                                  +-------------+      +--------+
@end example

After the establisment of the TCP connection the server issues a greeting.

@example
@cartouche
+OK POP3 Server ready <1047.990840869@@caesar.rome.it>
@end cartouche
@end example

The POP3 session is now in the AUTHORIZATION State.  The allowed commands
are:
@itemize @bullet
@item
User
@item
Pass
@item
Quit
@item
Capa (extension)
@item
Auth (extension)
@end itemize

When the client successfully authenticate the server acquires an exclusive
access lock on the mailbox and holds it the entire duration of the session.
The POP3 session enters The TRANSACTION State and the client may issues
commands to access the mailbox:
@itemize @bullet
@item
Stat
@item
List
@item
Retr
@item
Dele
@item
Noop
@item
Rset
@item
Top
@item
Uidl (extension)
@item
Quit
@item
Capa (externsion)
@end itemize

When the command @emph{Quit} is issue the POP3 session enters the UPDATE state.
The servers removes all messages marked deleted, releases the exclusive lock
and closes the TCP connection.

@subsection Commands
@cindex pop3_t

An opaque structure @emph{pop3_t} is use as a handle for the session, it is
allocate and initiliaze by calling @code{pop3_create ()}.  All Functions will
wait for a reply from the POP3 server before returning.  The duration of
the waiting can be set by calling @code{pop3_set_timeout ()}, the default
is 10 minutes@footnote{@strong{Caution:} Although the @cite{RFC 1939}
specifies that the minimum default timeout is ten minutes many servers has
shorter idle period, care should be taken to at least send a
@code{pop3_noop ()} between lengthy period of times.}.  Once a succesfull
connection is establish with @code{pop3_open ()}, two builtin authentications
are provided @code{pop3_apop ()} or @code{pop3_user ()}, @code{pop3_pass ()}.
The @code{pop3_stat ()} and @code{pop3_list ()} functions can be use to get the
messages count and sizes. Downloading of messages are done via a stream
provided by @code{pop3_retr ()} or @code{pop3_top ()}@footnote{
@strong{Caution:} Some Internet Service Providers do not permit to leave mail
on server and the message will be deleted once downloaded.}.
The @code{stream_t} should be
destroy to indicate to the library that the action is finish.  POP3 only
provide a single channel for operation, it means only one operation can be
done at a time, all the functions will return MU_ERROR_OPERATION_IN_PROGRESS
if call during another operation.  The functions @code{pop3_list_all ()},
@code{pop3_uidl_all ()} and @code{pop3_capa ()} give an @code{iterator_t},
when iterating @code{iterator_current ()} will give an object that should
be cast appropriatly and @code{free ()} by the caller, the @code{iterator_t}
must also be destroy, @code{iterator_destroy ()}.

@subsubsection Initialisation
@cindex POP3 Initialisation

@deftypefun int pop3_create (pop3_t *)

A valid @code{pop3_t} handle must be create first.

@table @code
@item MU_ERROR_NO_MEMORY
@item MU_ERROR_INVALID_PARAMETER
@end table
@end deftypefun

@deftypefun void pop3_destroy (pop3_t *)

When the POP3 session is finished, the structure must be free to reclaim
memory.
@end deftypefun

@deftypefun int pop3_open (pop3_t, const char *@var{host}, unsigned port, int @var{flags})

A connection is establish by calling @code{pop3d_open()}.  If non-blocking
the function should be recall until the return value is no MU_ERROR_TRY_AGAIN
or MU_ERROR_IN_PROGRESS.

@table @code
@item MU_ERROR_NO_MEMORY
@item MU_ERROR_INVALID_PARAMETER
@item MU_ERROR_IO
@item MU_ERROR_IN_PROGRESS
@item MU_ERROR_TRY_AGAIN
@item MU_ERROR_OPERATION_DENIED
@item MU_ERROR_TIMEOUT
@item MU_ERROR_NO_LOCK
@end table
@end deftypefun

@deftypefun int pop3_set_carrier (pop3_t, stream_t @var{carrier});

A connection may have been started elsewhere, in this case the @code{stream_t}
object is set on the @code{pop3_t} handle.

@table @code
@item MU_ERROR_INVALID_PARAMETER
@end table
@end deftypefun

@deftypefun int pop3_get_carrier (pop3_t, stream_t *@var{carrier});
@table @code
@item MU_ERROR_INVALID_PARAMETER
@item MU_ERROR_NO_MEMORY
@end table
@end deftypefun

@subsubsection Apop
@cindex POP3 Apop

@deftypefun int pop3_apop (pop3_t, const char *@var{user}, const char *@var{secret})

Apop offers an alternative to User/Pass authentication.  For intermitent
use of POP3, for example checking for new mail, it is the prefered
authentication.  It reduces the risk of passwd capture.  The @var{user}
and the shared @var{secret} are pass to @code{pop3_apop ()}, the MD5 digest
is calculated by applying the timestamp given by the server in the greeting
followed by the @var{secret} and a @emph{APOP user digest} command is send.

@table @code
@item MU_ERROR_INVALID_PARAMETER
@item MU_ERROR_IO
@item MU_ERROR_TIMEOUT
@item MU_ERROR_TRY_AGAIN
@item MU_ERROR_OPERATION_DENIED
@end table
@end deftypefun

@subsubsection Auth
@cindex POP3 Auth

@deftypefun int pop3_auth (pop3_t, const char *@var{auth})

To allow the use of mechanism such as @emph{SASL}, @cite{RFC 2449}, extended
POP3 mechanism whith AUTH. It permits the client to choose an alternate
way of authenticate.  @strong{Caution:} The @code{pop_auth()} is a simple
cover function that sends @emph{AUTH auth}, functions @code{pop3_sendline},
@code{pop3_readline}, @code{pop3_response} or the pop3 stream
@code{pop3_get_carrier ()} should be use appropriately to deal with the
challenges.

@table @code
@item MU_ERROR_INVALID_PARAMETER
@item MU_ERROR_IO
@item MU_ERROR_TIMEOUT
@item MU_ERROR_TRY_AGAIN
@item MU_ERROR_OPERATION_DENIED
@end table
@end deftypefun

@subsubsection Capa
@cindex POP3 Capa

@deftypefun int pop3_capa (pop3_t, iterator_t *)

The CAPA command is send to the sever and the list of capabilities is
return in an @var{iterator}. The @code{iterator_current ()} should be cast
to a @code{char **} and the string should be free by the caller.
@strong{Caution:} The iterator must be destroy after use, it will discard
any remaining response from CAPA and clear the way for new operations.

@table @code
@item MU_ERROR_INVALID_PARAMETER
@item MU_ERROR_IO
@item MU_ERROR_TIMEOUT
@item MU_ERROR_TRY_AGAIN
@item MU_ERROR_OPERATION_DENIED
@end table

@example
#include <mailutils/pop3.h>

void print_capabilities (pop3_t pop3)
@{
   iterator_t capa_iterator;
   status = pop3_capa (pop3, &capa_iterator);
   if (status == 0)
    @{
        for (iterator_first (capa_iterator);
             !iterator_is_done (capa_iterator);
             iterator_next (capa_iterator))
          @{
              char *capa;
              iterator_current (capa_iterator, (void **)&capa);
              printf ("CAPA: %s\n", capa);
              free (capa);
          @}
        iterator_destroy (&capa_iterator);
    @}
   else
     printf ("NONE\n");
@}
@end example

@end deftypefun

@subsubsection Dele
@cindex POP3 Dele

@deftypefun int pop3_dele (pop3_t, unsigned @var{msgno})

Sends A Dele to the servers who will mark the @var{msgno} for deletion.
The @var{msgno} may not refer to a message already marked deleted.
If successfull any future reference to @var{msgno} in other operations will
be an error, unless unmarked by RSET.

@table @code
@item MU_ERROR_INVALID_PARAMETER
@item MU_ERROR_IO
@item MU_ERROR_TIMEOUT
@item MU_ERROR_TRY_AGAIN
@item MU_ERROR_OPERATION_DENIED
@end table

@end deftypefun

@subsubsection List
@cindex POP3 List
@cindex struct pop3_list

@deftypefun int pop3_list (pop3_t, unsigned @var{msgno}, size_t *@var{size})

Sends a List for a specific @var{msgno} and returns the @var{size}.

@table @code
@item MU_ERROR_INVALID_PARAMETER
@item MU_ERROR_IO
@item MU_ERROR_TIMEOUT
@item MU_ERROR_TRY_AGAIN
@item MU_ERROR_OPERATION_DENIED
@end table
@end deftypefun

@deftypefun int pop3_list_all (pop3_t, unsigned @var{msgno}, iterator_t *)

Sends A LIST with no argument to the server. The @var{iterator} must be
destroy after use, it will discard any remaining response from LIST and
clear the way for new operations.  The @code{iterator_current ()} returns
a @code{struct pop3_list *} that must be @code{free ()}.

@example
struct pop3_list
@{
   unsigned int msgno;
   size_t size;
@};
@end example

@table @code
@item MU_ERROR_INVALID_PARAMETER
@item MU_ERROR_IO
@item MU_ERROR_TIMEOUT
@item MU_ERROR_TRY_AGAIN
@item MU_ERROR_OPERATION_DENIED
@end table

@example
#include <mailutils/pop3.h>

void print_list (pop3_t pop3)
@{
   iterator_t list_iterator;
   status = pop3_list_all (pop3, &list_iterator);
   if (status == 0)
    @{
        for (iterator_first (list_iterator);
             !iterator_is_done (list_iterator);
             iterator_next (list_iterator))
          @{
              struct pop_list *pl;
              iterator_current (list_iterator, (void **)&pl);
              printf ("Msg: %d Size: %s\n", pl->msgno, pl->size);
              free (pl);
          @}
        iterator_destroy (&capa_iterator);
    @}
   else
     printf ("NONE\n");
@}
@end example

@end deftypefun

@subsubsection Noop
@cindex POP3 Noop

@deftypefun int pop3_noop (pop3_t)

Sends a NOOP, usefull to reset the timeout on the server.

@table @code
@item MU_ERROR_INVALID_PARAMETER
@item MU_ERROR_IO
@item MU_ERROR_TIMEOUT
@item MU_ERROR_TRY_AGAIN
@item MU_ERROR_OPERATION_DENIED
@end table
@end deftypefun

@subsubsection Pass
@cindex POP3 Pass

@deftypefun int pop3_pass (pop3_t, const char *@var{passwd})

Sends the PASS, to authenticate after the USER command.

@table @code
@item MU_ERROR_INVALID_PARAMETER
@item MU_ERROR_IO
@item MU_ERROR_TIMEOUT
@item MU_ERROR_TRY_AGAIN
@item MU_ERROR_OPERATION_DENIED
@end table
@end deftypefun

@subsubsection Quit
@cindex POP3 Quit

@deftypefun int pop3_quit (pop3_t)

Enter the UPDATE state.  The server will delet all mesages marked
deleted before closing the connection.

@table @code
@item MU_ERROR_INVALID_PARAMETER
@item MU_ERROR_IO
@item MU_ERROR_TIMEOUT
@item MU_ERROR_TRY_AGAIN
@item MU_ERROR_OPERATION_DENIED
@end table
@end deftypefun

@subsubsection Retr
@cindex POP3 Retr

@deftypefun int pop3_retr (pop3_t, unsigned @var{msgno}, stream_t *)

If successfull a @code{stream_t} is created to allow dowloading of the message,
byte-stuff lines or handle internally, CRLFs are converted to LF.  All other
operations will failed until the stream is destroyed by the caller.

@table @code
@item MU_ERROR_INVALID_PARAMETER
@item MU_ERROR_IO
@item MU_ERROR_TIMEOUT
@item MU_ERROR_TRY_AGAIN
@item MU_ERROR_OPERATION_DENIED
@end table
@end deftypefun

@subsubsection Rset
@cindex POP3 Rset

@deftypefun int pop3_rset (pop3_t)

Sends a RSET to unmarked the messages maked deleted.

@table @code
@item MU_ERROR_INVALID_PARAMETER
@item MU_ERROR_IO
@item MU_ERROR_TIMEOUT
@item MU_ERROR_TRY_AGAIN
@item MU_ERROR_OPERATION_DENIED
@end table
@end deftypefun

@subsubsection Stat
@cindex POP3 Stat

@deftypefun int pop3_stat (pop3_t, unsigned @var{msgno}, unsigned *@var{msg_count}, size_t *@var{size})

Call a drop listing for the maildrop.  The number of messages in the mailbox
and the size of the mailbox in octets. @strong{Caution:} The size is in RFC
822 where line termination is CRLF, messages marked as deleted are not counted
in either total.

@table @code
@item MU_ERROR_INVALID_PARAMETER
@item MU_ERROR_IO
@item MU_ERROR_TIMEOUT
@item MU_ERROR_TRY_AGAIN
@item MU_ERROR_OPERATION_DENIED
@end table
@end deftypefun

@subsubsection Top
@cindex POP3 Top

@deftypefun int pop3_top  (pop3_t, unsigned @var{msgno}, unsigned @var{lines}, stream_t *)

If successfull a @code{stream_t} is created to allow dowloading of the header,
byte-stuff lines or handle internally, CRLFs are converted to LF.  All other
operations will failed until the stream is destroyed by the caller.

@table @code
@item MU_ERROR_INVALID_PARAMETER
@item MU_ERROR_IO
@item MU_ERROR_TIMEOUT
@item MU_ERROR_TRY_AGAIN
@item MU_ERROR_OPERATION_DENIED
@end table
@end deftypefun

@subsubsection Uidl
@cindex POP3 Uidl

@deftypefun int pop3_uidl (pop3_t, unsigned @var{msgno}, char **@var{uidl})

The Uniq Identifier is return in @var{uidl}, the string must be free,
by the caller.

@table @code
@item MU_ERROR_INVALID_PARAMETER
@item MU_ERROR_IO
@item MU_ERROR_TIMEOUT
@item MU_ERROR_TRY_AGAIN
@item MU_ERROR_OPERATION_DENIED
@end table
@end deftypefun

@deftypefun int pop3_uidl_all (pop3_t, iterator_t *)

An @code{iterator_t} object is return to iterate through the response and
must be destroy by the caller.  The @code{iterator_current ()} is a
@code{char **} that must be @code{free ()} by the caller.

@table @code
@item MU_ERROR_INVALID_PARAMETER
@item MU_ERROR_IO
@item MU_ERROR_TIMEOUT
@item MU_ERROR_TRY_AGAIN
@item MU_ERROR_OPERATION_DENIED
@end table
@end deftypefun

@subsubsection User
@cindex POP3 User

@deftypefun int pop3_user (pop3_t, const char *@var{user})

Sends the User command.

@table @code
@item MU_ERROR_INVALID_PARAMETER
@item MU_ERROR_IO
@item MU_ERROR_TIMEOUT
@item MU_ERROR_TRY_AGAIN
@item MU_ERROR_OPERATION_DENIED
@end table
@end deftypefun

@subsubsection Help functions

@deftypefun int pop3_writeline (pop3_t, const char *@var{format}, ...);

Copy in the internal buffer of @code{pop3_t} the string, @code{pop3_send ()}
should be call later to flush the string to POP3 server.

@table @code
@item MU_ERROR_INVALID_PARAMETER
@item MU_ERROR_IO
@item MU_ERROR_TIMEOUT
@item MU_ERROR_TRY_AGAIN
@item MU_ERROR_OPERATION_DENIED
@end table
@end deftypefun

@deftypefun int pop3_sendline (pop3_t, const char *@var{cmd});

Cover function.

@table @code
@item MU_ERROR_INVALID_PARAMETER
@item MU_ERROR_IO
@item MU_ERROR_TIMEOUT
@item MU_ERROR_TRY_AGAIN
@item MU_ERROR_OPERATION_DENIED
@end table

@example
int pop3_sendline (pop3_t pop3, const char *line)
@{
  /* .. */
  pop3_writeline (pop3_t, line);
  /* .. */
  pop_send (pop3);
  /* .. */
@}
@end example

@end deftypefun

@deftypefun int pop3_send (pop3_t, const char *@var{cmd});

Flushes out the strings int the @code{pop3_t} internal buffer to the channel.

@table @code
@item MU_ERROR_INVALID_PARAMETER
@item MU_ERROR_IO
@item MU_ERROR_TIMEOUT
@item MU_ERROR_TRY_AGAIN
@item MU_ERROR_OPERATION_DENIED
@end table
@end deftypefun

@deftypefun int pop3_response (pop3_t, char *@var{buffer}, size_t @var{len}, size_t *@var{plen})

The last response from the last command is save and can be examine after
a failure.

@table @code
@item MU_ERROR_INVALID_PARAMETER
@item MU_ERROR_IO
@item MU_ERROR_TIMEOUT
@item MU_ERROR_TRY_AGAIN
@item MU_ERROR_OPERATION_DENIED
@end table

@end deftypefun