@c This is part of the GNU Mailutils manual.
@c Copyright (C) 2010-2012, 2014 Free Software Foundation, Inc.
@c See file mailutils.texi for copying conditions.
@c *******************************************************************

@section Null stream
@cindex null stream
@cindex stream, null

A @dfn{null stream} is similar to the system @file{/dev/null} device.
It is not connected to any particular physical storage.  Any data
written to such stream are irrevocably lost.  Reading from such a
stream returns fixed data, depending on the mode of the stream.

An instance of the null stream is created using the following function:

@deffn {stream function} int mu_nullstream_create (mu_stream_t *pstr, int mode)
Create an instance of the null stream and return it in the memory
location pointed to by @var{pstr}.  The @var{mode} argument specifies
the access mode for this stream.  It can be a binary @samp{or} of the
following values:

@table @code
@item MU_STREAM_READ
Stream is opened for reading.
@item MU_STREAM_WRITE
Stream is opened for writing.
@end table

The returned stream is always seekable, so the @code{MU_STREAM_SEEK}
mode is implied.

Any other bits set in the @var{mode} argument are silently ignored.
@end deffn

Writing to an instance of null stream and seeking in such streams
always succeeds.  If the stream was created with the
@code{MU_STREAM_READ} on, the reads from it normally behave as if
it were connected to an endless source of zero bytes, i.e. each call
to:

@smallexample
  mu_stream_read (str, buf, size, &n);
@end smallexample

@noindent
results in filling @var{buf} with @var{size} zeroes.  This is similar
to reading from the system @file{/dev/zero} device@footnote{Note that
the internal implementation of @dfn{null streams} has nothing to do
with @file{/dev/null}, or @file{/dev/zero}.  We refer to these devices
only to illustrate the behavior of @dfn{null streams}.}.

This is the default behavior when reading.  It can be altered using
the @samp{MU_IOCTL_NULLSTREAM} ioctl.

@defvr {ioctl} MU_IOCTL_NULLSTREAM
This ioctl controls various parameters of a null stream.  Synopsis:

@example
mu_stream_ioctl (@var{stream}, MU_IOCTL_NULLSTREAM, @var{opcode}, @var{arg});
@end example

@noindent
where @var{opcode} is the operation code specific to null streams and
@var{arg} is the operation argument.  Supported operation codes and
their arguments are discussed below in this document.
@end defvr

@defvr {ioctl opcode} MU_IOCTL_NULLSTREAM_SET_PATTERN
Set the @dfn{pattern} for reads.  The argument is a pointer to
@dfn{struct mu_nullstream_pattern}, defined as:

@smallexample
@group
struct mu_nullstream_pattern
@{
  char *pattern;   /* Return pattern */          
  size_t size;     /* Number of bytes in pattern */
@};
@end group
@end smallexample

The @samp{pattern} member points to @samp{size} bytes of data which
are returned cyclically at each read.  For example, suppose that
@var{str} is a null stream instance, and consider the following code:

@smallexample
  struct mu_nullstream_pattern pat;
  char buf[16];
  size_t n;
  
  pat.pattern = "01234567";
  pat.size = 8;
  mu_stream_ioctl (str,
                   MU_IOCTL_NULLSTREAM,
                   MU_IOCTL_NULLSTREAM_SET_PATTERN,
                   &pat);

  mu_stream_read (str, buf, sizeof (buf), &n);
@end smallexample

Then, after the call to @code{mu_stream_read}, we will have:

@smallexample
@group
n @result{} 16
buf @result{} "0123456701234567"
@end group
@end smallexample

Similarly, the following code:

@smallexample
  mu_stream_seek (str, 3, MU_SEEK_SET, NULL);
  mu_stream_read (str, buf, sizeof (buf), &n);
@end smallexample

@noindent
will yield:

@smallexample
@group
n @result{} 16
buf @result{} "3456701234567012"
@end group
@end smallexample

The default behavior corresponds to the following initialization:

@smallexample
@group
  pat.pattern = "";
  pat.size = 1;
  mu_stream_ioctl (str,
                   MU_IOCTL_NULLSTREAM,
                   MU_IOCTL_NULLSTREAM_SET_PATTERN,
                   &pat);
@end group  
@end smallexample

Calling the @samp{MU_IOCTL_NULLSTREAM_SET_PATTERN} with a @samp{NULL}
argument causes all subsequent reads from that stream to return @samp{EOF}:

@smallexample
@group
  mu_stream_ioctl (str,
                   MU_IOCTL_NULLSTREAM,
                   MU_IOCTL_NULLSTREAM_SET_PATTERN,
                   NULL);
  @dots{}
  rc = mu_stream_read (str, buf, sizeof (buf), &n);

  rc @result{} 0
  n @result{} 0
@end group  
@end smallexample
@end defvr

@defvr {ioctl opcode} MU_IOCTL_NULLSTREAM_SET_PATCLASS
Set read pattern in terms of @dfn{C character classes}
(@FIXME-pxref{C character classes}).  Argument is a pointer
to an integer containing a bitwise @samp{OR} of the desired
character classes from @file{mailutils/cctype.h}.  For example,
the following code:

@smallexample
  int class = MU_CTYPE_DIGIT|MU_CTYPE_XLETR;
  mu_stream_ioctl (str,
                   MU_IOCTL_NULLSTREAM,
                   MU_IOCTL_NULLSTREAM_SET_PATCLASS,
                   &class);
@end smallexample

@noindent
initializes the read pattern to the following string:

@smallexample
0123456789ABCDEFabcdef
@end smallexample
@end defvr

Two ioctls are provided to control the @dfn{size} of a null stream
available to seek and read operations.

@defvr {ioctl opcode} MU_IOCTL_NULLSTREAM_SETSIZE
Limit the addressable size of a null stream.  Argument is a pointer
to @samp{mu_off_t} object specifying the new size.  The example below
limits the stream size to 32 bytes:

@smallexample
@group
  mu_off_t limit = 32;
  mu_stream_ioctl (str,
                   MU_IOCTL_NULLSTREAM,
                   MU_IOCTL_NULLSTREAM_SETSIZE,
                   &limit);
@end group  
@end smallexample
@end defvr

Another way to set the null stream size is via the
@samp{mu_stream_truncate} function:

@smallexample
  mu_stream_truncate (str, 32);
@end smallexample

Setting the stream size to @samp{0} causes all subsequent reads from
that stream to return @samp{EOF}.  The similar effect has the
@samp{MU_IOCTL_NULLSTREAM_SET_PATTERN} ioctl with the @samp{NULL} argument.

@defvr {ioctl opcode} MU_IOCTL_NULLSTREAM_CLRSIZE
Cancel the size limitation imposed by a previous
@samp{MU_IOCTL_NULLSTREAM_SETSIZE} ioctl or a call to
@samp{mu_stream_truncate}.  Argument must be @samp{NULL}.
@end defvr

@menu
* null stream usage::
@end menu

@node null stream usage
@subsection null stream usage

Due to their nature, null streams are not among the most used stream
flavors.  They are mainly useful for testing or measuring purposes.

The @command{mhn} utility from GNU Mailutils MH suite gives a nice
example of using a null stream instance to compute the actual
(decoded) size of a part of a MIME message.  In the example below
we present a simplified version of this code.  It defines the
function @samp{decoded_size}:

@deffn {example function} mu_off_t decoded_size (mu_stream_t mime_str, @
       const char *encoding)
Return the size of the decoded input strem.  Arguments are:

@table @var
@item mime_str
A stream obtained from the MIME part.

@item encoding
Encoding type, as obtained from the @samp{Content-Transfer-Encoding}
MIME header.
@end table

@example
mu_off_t
decoded_size (mu_stream_t mime_str, const char *encoding)
@{
  int rc;           /* Result code */
  mu_stream_t fstr  /* Filter stream */
  mu_stream_stat_buffer stat; /* Statistics buffer */
  mu_stream_t null; /* Null stream */
@end example

First, create the filter stream for decoding the message part:
@example
  rc = mu_filter_create (&fstr, mime_str, encoding,
                         MU_FILTER_DECODE, MU_STREAM_READ);
  if (rc)
    abort ();
@end example

Then, create an instance of the null stream which will act
as a receiver:

@example
  mu_nullstream_create (&null, MU_STREAM_WRITE);
@end example

The data will be read from @var{fstr} and written to @var{null}.
Number of bytes written will give the decoded size of the message.
To get this number, attach the statistics buffer to the null
stream:

@example
  mu_stream_set_stat (null, MU_STREAM_STAT_MASK (MU_STREAM_STAT_OUT),
                      stat);
@end example

The second argument instructs the stream to keep track of the
bytes output (i.e. written) to the stream.

Now, copy the entire contents of @var{fstr} to @var{null}:

@example
  rc = mu_stream_copy (null, fstr, 0, NULL);
  if (rc)
    abort ();
@end example

When done, destroy both streams (they are not needed any more), and
return the value of @samp{MU_STREAM_STAT_OUT} element from @var{stat}:

@example
  mu_stream_destroy (&null);
  mu_stream_destroy (&fstr);
  return stat[MU_STREAM_STAT_OUT];
@}  
@end example