2001-07-06 Sergey Poznyakoff
	* imap4d/fetch.c: imap4d_fetch0(): return RESP_OK on success.
	* imap4d/bye.c: split imap4d_bye() into imap4d_bye() and imap4d_bye0().
	* imap4d/logout.c: call imap4d_bye0() instead of imap4d_bye().
	Reason: rfc 2060 requires that the server send a BYE untagged response
	before the (tagged) OK response. With our implementation it was
	vice-versa.
	* imap4d/imap4d.h: proto for imap4d_bye0().
	* mail/mail.c: changed startup banner.
	* mail/mailline.c: handle SIGWINCH.
	* mail/util.c: Include <termios.h> when present.
	* configure.in: test for the presence of <termios.h>

2001-07-05  Alain Magloire

	* mail/send.c(mail_send0): Put the mailer in debug mode
	if util_find_env("verbose")->set, good for debuging.

2001-07-05  Alain Magloire

	According to the man page:
	"sendmail contains a command, possibly with options, that mailx
	invokes to send mail. You must manually set the default for this
	environment variable by editing ROOTDIR/etc/mailx.rc to specify the
	mail agent of your choice. The default is sendmail, but it can be any
	command that takes addresses on the command line and message contents
	on standard input."

	* mail/mail.c (main): Register smtp_record too as a mailer.
	Set variable sendmail to _PATH_SENDMAIL as the default mailer.
	* mail/mail.h: New proto util_setenv(), util_find_env()
	change to be const char *.
	* mail/send.c (msg_to_pipe): New function, open a pipe()
	and write a message to it.
	(mail_send0): Now create the mailer according to
	util_find_env("sendmail")->value.  Use a pipe() if mailer_create()
	fails.
	* mail/set.c (mail_set): After free(entry->value) set the value
	to NULL.
	* mail/util.c (util_find_env): Change the prototype to be const.
	Remove hack about need_free and use a static variable to hold
	"asksub".
	* mail/util.c (util_setenv): New function to set environment
	model on libc call setenv().

	* mailbox/message.c (message_sender): Set the default sender base on
	the passwd entry.

2001-07-05  Alain Magloire

	We can send a message and if the address starts with '|'
	the message is pipe to the cmd and if starts with '/' it is
	save to a file.
	     mailx ghislaine '|cat >save'
	mails a message to ghislaine and also copies the message into a file
	called save.

	* mail/mail.h: Change struct send_environ to contain
	two new fields char **outfiles and int nfiles.
	* mail/send.c: Look for '/' and '|' when parsing the addresses
	and add them to struct send_environ outfiles.
	(mail_send0):  Memory overflow, we were free(buf) twice.
	made char *buf local where it is needed.  Save the message
	to outfiles when set.
	(isfilename): New function.
	* mail/followup.c: Initialise the struct send_environ new fields.
	* mail/reply.c: Initialise the struct send_environ new fields.

	* lib/argcv.c: Add support to consider string between
	single quote like one word(same as double quotes).

2001-07-04  Alain Magloire

	* mailbox2/stream.c: stream_read() and stream_write()
	change prototype to be "void *" instead of "char *".
	* mailbox2/bstream.c: Adjust bstream_{read,write} to the
	new prototypes.
	* mailbox2/pop3/pop3_stream.c: Likewised.
	* mailbox2/Makefile.am: New file.
	* mailbox2/pop3/Makefile.am: New file.
	* mailbox2/mstream.c: Mapfile stream Implementation.
	* mailbox2/fstream.c: File stream implementation.
	* mailbox2/include/mailutils/sys/fstream.h: New file.
	* mailbox2/include/mailutils/sys/mstream.h: New file.
	* mailbox2/tcp.c: rename to tcpstream.c.
	* mailbox2/include/mailutils/sys/tcp.h: Rename to tcpstream.h

	* mailbox/mapfile_stream.c (_mapfile_write):  Make sure
	the size is not zero before making the memcpy().

2001-07-03  Alain Magloire

	* mail/headers.c:  Catch the overflow in the calculation by
	reseting the number of lines to default screen lines.
	* mail/mail.c (main): Add a "summary" call also for the
	initial commands on startup(in interactive).
	* mail.h: Proto for mail_summary() and mail_version().
	* table.c: Add mail_summary() and mail_version() in the cmd table.
	* util.c (util_getcols): First try an ioctl(TIOCGWINSZ,..) call
	not all shells set the COLUMNS environ.
	(util_getlines): Likewised. Also take to account the prompt
	in the lines number.
	* z.c (mail_z): Change the behaviour of "z." to show a screenfull
	when the lastpage is reach.  This is very practical when starting
	mail, since "z." is the initial command to show the header summary.
	* mail/version.c: New file, show mail version, mail_version().
	* mail/summary.c: New file, display a short summary of the mailbox.
	mail_summary().
	* mail/Makefile.am: add summary.c and version.c

	* mailbox2/include/mailutils/mbox.h: Proto for Unix-Mbox.

2001-07-03  Jakob 'sparky' Kaivo  <jkaivo@elijah.nodomainname.net>

	* README-alpha: note that INSTALL is generated

2001-07-03 Sergey Poznyakoff
	* configure.in: --with-mail-rc option: set path to system-wide
	mail.rc file.
	* mail/Makefile.am,mail/mail.c: Likewise.
	* mail/send.c: check for "dot" variable. Implemented "~.",
	"appenddeadletter".
	* mail/inc.c: (new) inc[orporate] command.
	* mail/{mail.c,mail.h,table.c}: Ditto.
	* mail/print.c: Handle interrupts when fetching message body.
	* mail/followup.c: insert ',' between recepients' addresses.
	* mail/quit.c: use mailbox_save_attributes(). Implemented
	"hold" variable. Raise MU_ATTRIBUTE_READ on every message with
	MU_ATTRIBUTE_SEEN bit set (compatibility with existing mails).
	* mail/from.c: Changed order of checking message attribute bits to
	be compatible with existing implementations.
	* mail/z.c: removed break from the loop.
	* mailbox/attribute.c: added attribute_set_modified() function.
	Fixed attribute_unset.* functions to raise MU_ATTRIBUTE_MODIFIED bit.
	* include/mailutils/attribute.h: Proto for attribute_set_modified().

2001-07-02 Alain Magloire

	* mailbox2/tcp.c: make it thread-safe.
	* mailbox2/bstream.c: Implement buffered stream.
	* mailbox2/pop3_stream.c: Use a buffered stream.

2001-07-02 Alain Magloire

	Feedback from Sergey for the need of saving the attribute flags
	without expunging.  Note, this is a hack, the code is taken from
	mbox_expunge(mbx_mbox.c) and there is lot of duplication.  But
	since we are moving toward a new mailbox API, the code will be
	rewritten more cleanly in the new API.

	* include/mailutils/mailbox.h: Add proto mailbox_save_attributes()
	* mailbox/include/mailbox0.h: New field in struct _mailbox
	_save_attributes (mailbox_t);
	* mailbox/mailbox.c: New function mailbox_save_attributes ().
	* mailbox/mbx_mbox.c: New function mbox_save_attributes (),
	implement saving the attribute flags in header field "Status:"

	* imap4d/bye.c: call mailbox_save_attributes() when exiting.
	it will save the attribute flags.
	* imap4d/close.c: Typo.
	* imap4d/logout: Remove the mailbox_close() and mailbox_destroy()
	it is being call imap4d_bye ().
	* imap4d/select.c (imapr3d_select0): call mailbox_save_attributes()
	if a mailbox was already selected.

2001-07-01 Alain Magloire

	* mail/util.c (util_strupper):  The first implementation was
	buggy, corrected.

2001-07-01 Alain Magloire

	* mailbox2/pop3/*: Pop3 functions are thread-safe and cancel-safe.
	The problem is monitor.h, we will probably end up doing a monitor.h.in
	and set at compile time if threading is enable or not.

2001-07-01 Alain Magloire

	* mail/util.c (util_expand_msglist): Cleanup the expand by pattern
	by moving some code in util_strupper(), the comparison must be
	case insensitive.
	(util_strupper): Convert the string to uppercase.

2001-07-01 Sergey Poznyakoff
        * mailbox/attribute.c: set MU_ATTRIBUTE_MODIFIED bit in the underlying
        structure when setting the flags.
        * mail/mail.c: Initialize readline and set user name before
        determining working mode.
        For an empty mailbox output diagnostics and quit.
        Read system-wide mail.rc file.
        Implemented "set ignoreeof".
        * mail/send.c: Implemented "set ignore", "set ignoreeof", "set nosave".
        Use doubled escape character to insert a single escape to the
        message body.
        * mail/delete.c: Implemented "set autoprint"
        * mail/dp.c: removed util_do_command("next"): delete does this anyway.

2001-06-30 Sergey Poznyakoff
	* configure.in:
		define READLINE_LIBS instead of linking libreadline
		to every binary.
		AC_CHECK_LIB(pthread) was missing comma before
		ACTION_IF_NOT_FOUND, thus have_libpthread was always no.
	* mail/Makefile.am: Use READLINE_LIBS
	* lib/argcv.[ch]: Treat a sequence of whitespace characters as
	a single whitespace. Break string on given delimiters. Do not
	split quoted arguments.
	* mail/set.c: Modified to use new argcv_get() syntax.
	* mail/delete.c: After deleting move realcursor to the next
	non-deleted message.
	* mail/alt.c: Honour "metoo" variable. Try to determine users
	full email address.
	* mail/mail.c: do not put empty or comment lines into readline
	history. Handle keyboard interrupts properly.
	Implemented `warranty' command. Warn user about arrival of a new
	mail.
	* mail/send.c: Handle keyboard interrupts. Use util_tempfile().
	* mail/{send.c,reply.c}: change args in call to mail_send0(): packed
	all header strings into one structure to facilitate escape handling.
	Warn user about null message body.
	* mail/mailline.c: (new) readline-related functions.
	* mail/var.c: (new) Functions for escape variable handling.
	* mail/util.c: added extra argument to util_find_entry(): a pointer
	to the table where to look up. Added util_error(), util_help(),
	util_tempfile().
	* mail/*.c: use util_error() instead of printing diagnostics to ofile.
	* mail/{source.c,if.c}: removed mail_is_terminal(),
	mail_set_is_terminal(): `interactive' is used instead.
	* mail/mail.h: in struct mail_command_entry changed `isflow' field
	to `flags'. It contains information about semantics of the command.
	* mail/table.c: Initialize `flags' field.


2001-06-29  Alain Magloire

	* mail/util.c (util_expand_msglist): Implement expansion of
	:d       All deleted messages
	:n       All new messages
	:o       All old messages
	:r       All messages that have already been read
	:u       All unread messages
	/string  All messages with string in the subject line
                 (the case of characters in string is ignored)

2001-06-27  Alain Magloire

	* configure.in:  We were not checking for thread support
	at all because the test was faulty.

	* readmsg: New directory.
	* readmsg/readmsg.c: New file.
	* readmsg/readmsg.h: New file.
	* readmsg/msglist.c: New file.
	This is base on a old testing program Dave inglis wrote
	to test the mime parsing code.  It is still work in progress
	but a good base for the readmsg(1) elm utility clone.
	Not enable yet in the TOP Makefile.

2001-06-26  Alain Magloire

	* mail/from.c:  Use address_get_personal() for a more
	pretty print when showing the headers.

2001-06-26 Sergey Poznyakoff
	* mail/util.c:
		Added extra argument to util_msglist_command(), controlling
		whether it should move the cursor to the last message
		processed.
	* mail/delete.c,mail/dp.c,mail/edit.c,mail/from.c,mail/hold.c,
	  mail/mbox.c,mail/print.c,mail/reply.c,mail/size.c,mail/top.c,
	  mail/undelete.c,mail/util.c,mail/visual.c: Likewise.
	* mail/util.c: util_screen_lines() function.
		util_outfolder_name().
		util_save_outgoing()
	* mail/z.c: removed z_lines() in favor of util_screen_lines().
	* mail/headers.c: use util_screen_lines().
	* mail/touch.c: Initial implementation. Simply calls mail_mbox.
		Maybe the table.c entry should point to mail_mbox instead?
	* mail/write.c: use util_fullpath().
	* mail/send.c: call util_save_outgoing() to preserve sent message.
		Set umask 077 before calling mkstemp().
	* mail/folders.c: Use $LISTER.
	* mail/followup.c: Implemented.
	* mail/from.c: Changed output format.
	* mail/mbox.c: move mail_mbox_commit to quit.c.
	* mail/quit.c: Likewise. Honour "keepsave" variable.

2001-06-25  Alain Magloire

	* mail/header.c: We were looping forever in here.  The loop
	is not need it, header only prints one page that includes
	the message specified i.e. the header command only takes
	a message number as an argument that will serve as a reference
	to display a screen full.

	* mail/help.c: Use the pager code, the help is long.

2001-06-25  Alain Magloire

	* doc/Makefile.am: add {c-api,framework,programs}.texi EXTRA_DIST
	* imap4d/imap4d.c (imap4d_usage): Cut and paste typo.
	* pop3d/pop3d.c (pop3d_usage): Cut and paste typo.
	* include/mailutils/Makefile.am: add mutil.h to the list.
	* lib/strisignal.c: Define __P if not set.
	* m4/Makefile.am: Added tm_gmtoff.m4 tm_isdst.m4 tm_zone.m4

2001-06-25 Sergey Poznyakoff
	* mail/if.c: Removed confusing comment.
	* mail/copy.c: Split off mail_copy0. It is shared between mail_copy
		and mail_save. Implemented Copy command.
		Use mailbox_open_default() instead of mailbox_open().
		Fixed possible memory leaks.
	* mail/write.c: Implemented Write. Fixed memory leaks.
	* mail/Makefile.am: removed discard.c
	* mail/discard.c: removed. Implemented in retain.c.
	* mail/retain.c: Implemented retain/ignore. It is more convenient
		to keep them in one module so they can share static data.
	* mail/alias.c: Implemented.
	* mail/unalias.c: Implemented.
	* mail/alt.c: Implemented.
	* mail/file.c:
		Check number of arguments.
		Display current mailbox name when called without args.
		Honour %, &, and + in mailbox names (possibly should
		be implemented in mailbox_open_default ?).
		Use mail_mbox_close(). After opening new mailbox,
		run "z." instead of "from *".
	* mail/folders.c: A (very rudimentary) implementation.
	* mail/headers.c: Removed if (num) clause: util_expand_msglist()
		now returns at least 1.
	* mail/pipe.c: Likewise.
	* mail/hold.c: Implemented.
	* mail/mail.c: Escape % signs in the command line before passing
		it to util_do_command().
	* mail/mail.h: Protos for implemented functions. Proto for
		readline() if libreadline is not linked in.
		Definition for MAIL_ATTRIBUTE_MBOXED.
	* mail/mbox.c: Implemented.
	* mail/print.c: Print only header fields allowed by retain/ignore
		settings.
	* mail/quit.c: mail_mbox_close() shared between this module and
		file.c.
		Print statistics information on closing the mailbox (number
		of messages held and saved in mbox).
	* mail/reply.c: Implemented.
	* mail/save.c: Use mail_copy0().
	* mail/send.c: Split off mail_send0(). It is used by mail_send()
		and mail_reply().
	* mail/util.c:
		util_expand_msglist(): return 1 and set msglist[0]=cursor
		if argc == 1.
		util_do_command(): Added missing va_end().
		util_get_sender(): Returns sender email for the given msgno.
			Optionally strips off domain part.
		util_slist_.*(): "string lists" used by alias,alt,retain,
			ignore.
		util_strcat(): Concat two strings, reallocating first
			to the necessary length.
		util_escape_percent(): Excape % signs in a string, so
			it can be used as format in .*printf calls.

2001-06-22 Sergey Poznyakoff
	* mailbox/mutil.c: added mu_get_homedir() and mu_tilde_expansion();
	* include/mailutils/mutil.h: protos for new mu_ functions
	* imap4d/util.c: use mu_tilde_expansion().
	* mail/z.c: implemented.
	* mail/if.c: implemented.
	* mail/mail.c: A read-eval loop function shared between mail.c and
		source.c. Quits gracefully upon reading EOF.
		Expand '~' in pathnames.
		Upon startup in read mode, display first screenfull of from
		lines, instead of listing the whole mailbox. This is
	        compatible with existing implementations.
		Do not display prompt when not reading from a terminal.
	* mail/source.c: Use common read-eval loop.
	* mail/mail.h: Protos for new functions.
		struct mail_command_entry: added isflow field, needed
		for if/else/endif flow control.
	* mail/table.c: changes due to addition of isflow field.
	* mail/send.c: removed unconditional #include <paths.h>: it already
		was included from "mail.h".
	* mail/util.c: Added util_get_homedir() and util_fullpath().

2001-06-21 Sergey Poznyakoff
	* mailbox/mutil.c: Fixed error introduced in the initial
	  implementation of mu_mktime (now mu_tm2time). The comment
	  on mu_tm2time() describes it.
	  Revert the sign of the return value of mu_utc_offset(), so it
	  agrees with the accepted timezone rules (+ for eastern
	  hemisphere, - for western).

2001-06-19 Sam Roberts

	* include/mailutils/debug.h, mailbox/debug.c: New function:
	  debug_printv() to complement debug_print().
	* examples/mbox-dates.c: parse822_date_time now takes a timezone
	  argument. We don't actually use the arguments, though.
	* include/mailutils/parse822.h: parse82_date_time() now uses the
	  mu_timezone structure for portability.
	* include/mailutils/mailbox.h: Prototyped mailbox_destroy_folder().
	* mailbox/mu_mktime.c: Moved mu_mktime to mutil.c as mu_tm2time,
	  and removed mu_mktime.c
	* include/mailutils/mutil.h, mailbox/Makefile.am,
	  mailbox/mbx_imap.c, mailbox/mutil.c, mailbox/parse822.c: Moved some
	  generically useful date/time handling functions to mutil.c, fixed
	  problems with portability of timezone information in struct tm, and
	  created a new structure to hold timezone information, since
	  struct tm doesn't do so reliably.
	* imap4d/: append.c, fetch.c, imap4d.h, namespace.c, search.c,
	  util.c: Moved date/time parsing utility functions to
	  mailbox/mutil.c.  Added braces to initializers and removed unused
	  variables prototyped shared functions, made functions that didn't
	  return return void. (to quiet gcc -Wall),

2001-06-17 Sam Roberts

	* sieve/Makefile.am: More fixes to the packaging structure by
	Sergey.
	* acconfig.h, configure.in, m4/tm_gmtoff.m4, m4/tm_isdst.m4,
	m4/tm_zone.m4: Added tests for isdst, gmtoffset, and zone in struct
	tm.
	* mailbox/folder_pop.c: Confusing typo in comment.

2001-06-16 Sergey Poznyakoff
        * mailbox/mu_mktime.c(added): a wrapper around system mktime()
          function that honours the timezone.
        * mailbox/Makefile.am: add mu_mktime.c.
        * imap4d/fetch.c: date conversion in fetch_internaldate.
          get_timezone() not used anymore, removed.
        * imap4d/search.c: removed confusing comment.
        * imap4d/util.c: changed mktime() calls to mu_mktime(), this
          solves the timezone problem.
          use imap_parse_date_time() in util_parse_internal_date0().
	  (Proposed by Sam).
	* imap4d/imap4d.h: Added missing declarations.
        * mailbox/mbx_imap.c: Patch from Sam: added imap_parse_date_time().
          imap_parse_date_time() returns tm/timezone pair.
	* mailbox/folder_mbox.c: added #include <sys/types.h>. It is needed
          on FreeBSD before inclusion of <dirent.h>
	* sieve/sieve.c: swapped arguments in a call to va_start().

2001-06-15 Sergey Poznyakoff
	Bunch of patches provided by Sam Roberts:
	* imap4d/util.c: Fixed format bugs in util_parse.*_date functions.
          Use parse822_date_time() in util_parse_header_date().
	  Some changes to pacify gcc -Wall.
	* imap4d/util.c,imap4d/search.c,imap4d/imap4d.h:
	  Rename the confusing functions:
		 util_parse_header_date -> util_parse_822_date
		 util_parse_rfc822_date -> util_parse_ctime_date
	  include <ctype.h>

2001-06-14 23:01  sroberts

	* mailbox/parse822.c: I think timezone info is now placed in struct
	tm correctly.
	* include/mailutils/parse822.h: Prototypes for functions to parse
	rfc822 date-time.
	* sieve/: Makefile.am, test.c: Patches from Sergey to make the
	auto* stuff work, now uses lex/yacc portably, and puts all the
	necessary files into the distribution.
	* sieve/ylwrap: Portable wrapper for lex/yacc invocations, by Tom
	Tromey <tromey@cygnus.com>, modified by Sergey Poznyakoff
	<gray@farlep.net> to replace yy prefixes, so multiple grammers can
	co-exist.
	* sieve/sieve.c: Define EOK ifndefed.
	* examples/showmail.c: No longer relevant to the current APIs.
	* examples/mbox-dates.c: GNU indented.
	* examples/addr.c: GNU indented
	* examples/.cvsignore: Added example executables.
	* examples/mbox-explode.c: Made so it now saves all the attachments
	from all the messages in a folder. Also GNU indented.
	* doc/envelope.texi: Added some text to the envelope docs, still
	incomplete.
	* doc/url.texi: Noted the IMAP url syntax.
	* doc/mailutils.texi: Some of the RFCs were missing, or
	miscategorized in the references sect.
	* doc/.cvsignore: Ignoreing files.
	* doc/rfc1939.txt: Was checked in with DOS line terminators,
	converted to Unix.

2001-06-11  Alain Magloire

	* imap4d/util.c (util_msgset): When '*' was define in the
	set it was not added to the count.
	Bug reported by Jakob Kaivo.

2001-06-09  Alain Magloire

	* mailbox2/pop3/pop3_open.c: Remove for pop3_connect.c
	* mailbox2/pop3/pop3_close.c: Remove for pop3_disconnect.c
	* mailbox2/pop3/pop3_connect.c: New.
	* mailbox2/pop3/pop3_disconnect.c: New.
	* mailbox2/include/mailutiils/error.h: New macro
	MU_ERROR_OPERATION_CANCELED
	* mailbox2/include/mailutils/pop3.h: Move the enum state in sys/pop3.h

2001-06-09 Sam Roberts

	* rfc1738.txt, rfc2045.txt, rfc2046.txt, rfc2047.txt, rfc2049.txt,
	rfc2088.txt, rfc2111.txt, rfc2192.txt, rfc2193.txt, rfc2221.txt,
	rfc2298.txt, rfc2342.txt, rfc2368.txt, rfc2384.txt, rfc2821.txt,
	rfc2822.txt, rfc3028.txt, rfc821.txt, rfc822.txt: These RFCs are
	relevant to mailutils, and many (all?) are referenced in the
	mailutils documentation.

2001-06-09  Alain Magloire

	* examples/mbox-explode.c: message_save_attachment, should take
	the part.  Continue if the message does have a Date or Subject field.

	* mailbox/mapfile_stream.c (_mapfile_open): Identation.

2001-06-09  Alain Magloire

	* mailbox/tcp.c (_tcp_get_fd): Buglet, comparing fd against EINVAL
	instead of -1.

	* mailbox2/pop3/pop3_apop.c: New.
	* mailbox2/pop3/pop3_capa.c: New.
	* mailbox2/pop3/pop3_close.c: New.
	* mailbox2/pop3/pop3_create.c: New.
	* mailbox2/pop3/pop3_dele.c: New.
	* mailbox2/pop3/pop3_destroy.c: New.
	* mailbox2/pop3/pop3_iterator.c: New.
	* mailbox2/pop3/pop3_list.c: New.
	* mailbox2/pop3/pop3_lista.c: New.
	* mailbox2/pop3/pop3_noop.c: New.
	* mailbox2/pop3/pop3_open.c: New.
	* mailbox2/pop3/pop3_pass.c: New.
	* mailbox2/pop3/pop3_quit.c: New.
	* mailbox2/pop3/pop3_readline.c: New.
	* mailbox2/pop3/pop3_response.c: New.
	* mailbox2/pop3/pop3_retr.c: New.
	* mailbox2/pop3/pop3_rset.c: New.
	* mailbox2/pop3/pop3_sendline.c: New.
	* mailbox2/pop3/pop3_stat.c: New.
	* mailbox2/pop3/pop3_stream.c: New.
	* mailbox2/pop3/pop3_timeout.c: New.
	* mailbox2/pop3/pop3_top.c: New.
	* mailbox2/pop3/pop3_uidl.c: New.
	* mailbox2/pop3/pop3_uidla.c: New.
	* mailbox2/pop3/pop3_user.c: New.

	* mailbox2/tcp.c: New.
	* mailbox2/iterator.c: New.
	* mailbox2/stream.c: New.

	* mailbox2/pop3/pop3client.c: Test case should probably somewhere else
	in example/ perhaps?

2001-06-09  Alain Magloire

	* mailbox2/*: First attempt to define the new API.
	POP3 was implemented.

2001-06-07  Sam Roberts

	* .cvsignore, AUTHORS, COPYING, Makefile.am, NEWS, README,
	addr-lex.l, addr.y, comparator.c, comparator.h, exitcodes.h,
	hmac-md5.h, imparse.c, imparse.h, interp.c, interp.h, md5.c, md5.h,
	md5global.h, message.c, message.h, parseaddr.c, parseaddr.h,
	script.c, script.h, sieve-gram.y, sieve-lex.l, sieve.c,
	sieve_err.c, sieve_err.h, sieve_interface.h, svfield.c, svfield.h,
	sysexits.h, test.c, tree.c, tree.h, util.c, util.h, xmalloc.c,
	xmalloc.h: Initial commit of the port of CMU's sieve engine. It
	builds, and some actions work, but has seen very little use.

2001-06-03  Sam Roberts

	* mailbox/file_stream.c,mailbox/mapfile_stream.c: Return EINVAL
	  for meaningless combination of MU_STREAM_READ + WRITE.

2001-06-03  Alain Magloire

	* doc/*; Bunch of typos corrected.
	Patch from Thomas Fletcher.

2001-06-02  Sam Roberts

	* mailbox/parse822.c,include/mailutils/parse822.h: functions
	  to parse rfc822 date-time.
	* examples/mbox-explode.c: example of saving all mime attachments
	  for messages in a mailbox.
	* examples/mbox-dates.c: example of using the date-time parser, it
	  prints all the dates in a mailbox that it can't parse.
	* examples/Makefile: makes the mbox-* examples.

2001-06-01  Alain Magloire

	* mailbox/mbx_pop.c (pop_writeline): if buffer is NULL noop.

2001-06-01  Sergey Poznyakoff
	* imap4d/search.c: case-insensitive comparison for text fields.
	  Error checking for stray symbols at the end of criteria.

	* imap4d/util.c: util_strcasestr() function. Functions for
	  converting between text and integer representation of
	  attributes. Split util_parse_internal_date: the helper
	  function util_parse_internal_date0 also returns the
          pointer to the location in the string where parsing
          stopped.

	* imap4d/util.h: protos for util_strcasestr() and
	  util_parse_.*_date() functions.

	* imap4d/imap4d.c: force ofile to be line-buffered, so command
	  continuation requests are immediately visible.

	* imap4d/append.c: implemented. Currently this needs the
	  helper function mailbox_destroy_folder(), so that
	  mailbox_set_stream does its work. Also the situation
          with message attributes needs to be cleared.

2001-06-01  Alain Magloire

	* mailbox/debug.c(debug_print): Noop is format is NULL;
	* mailbox/mbx_imap.c (imap_messages_count):  Hack! Force a
	reconnect if the server timeout on us.  This is not the right
	approach and does not work well, fix later.
	(message_operation):  Check if selected is not null, first.
	* mailbox/folder_imap.c (folder_imap_create): Wrong state.
	* mailbox/mime.c: Pass down the return value if not ENOENT.

2001-05-30  Dave Inglis

	* mailbox/mbx_pop.c (CHECK_ERROR): Force the mailbox to call connect
	again when an error occured.  For example the QPopper(Qalcomm) POP3
	server timeout very quickly, 30 seconds violating the RFC.  So when
	Readin the stream again we reconnect.

2001-05-30  Dave Inglis

	* mailbox/filter_trans.c (base64_decode): The variable should
	be unsigned char not signed char.  By default gcc treats a
	declaration of "char*" like "signed char*", CC Watcom did not.
	(base64_encode): Likewised.
	* mailbox/mime.c: Read 'itl the end of the stream.

2001-05-29  Sergey Poznyakoff
	* imap4d/uid.c, imap4d/search.c: support for UID SEARCH command;
	* imap4d/util.c: forgotten fix to util_msgset().

2001-05-27  Sergey Poznyakoff
	* imap4d/search.c: Added missing <message set> condition.

2001-05-27  Sergey Poznyakoff

	* imap4d/imap4d.c, imap4d/capability.c, imap4d/copy.c,
	  imap4d/create.c, imap4d/delete.c, imap4d/imap4d.h,
          imap4d/list.c, imap4d/rename.c, imap4d/select.c,
          imap4d/status.c, imap4d/namespace.c (added):
		implemented NAMESPACE (rfc2342) support

	* imap4d/util.c:
		added util_normalize_path() function.
		util_msgset() bailed out at 1:1 -- fixed.
		Added util_parse_internal_date(), util_parse_header_date(),
		util_parse_rfc822_date().

	* imap4d/bye.c: typo in diagnostic output
	* imap4d/noop.c: issue unsolicited response (as per rfc2060)
	* imap4d/select.c: ditto
	* imap4d/store.c: set MU_ATTRIBUTE_MODIFIED on a message, so
		expunge will know it was modified.

	* imap4d/search.c: implemented. Charsets other than US-ASCII are
		not supported, though.

2001-05-27  Sam Roberts

	* mailbox/address.c: removed unfolding of lines at a NL before parsing.
	* mailbox/parse822.c: consider LF and CRLF equivalent for purposes
	of unfolding lines.

2001-05-23  Alain Magloire

	* mailbox/mbx_default.c (mailbox_create_default): Check
	for URL in the mailbox name.

2001-05-23  Dave Inglis

	* mailbox/mime.c (_mimepart_body_read): Use stream_is_seekable()
	to detect if the stream is POP for example and read 'til the end.
	(mime_get_part): Reuse the stream the original stream flags on the
	newly created message.
	Fix and patches provided by Dave Inglis.

2001-05-23  Sergey Poznyakoff

	* pop3d/user.c: check for NULL return from getpwnam()
	* imap4d/login.c: Likewised.

2001-05-21  Alain Magloire

	GNU md5 is GPL, but we agreed that the libraries should
	fall under LGPL.
	Same goes for basename() and pretty much everything under
	lib/*.[ch]

	* mailbox/message.c (message_get_uidl): Remove the dependency
	from GNU md5.
	* mailbox/md5-rsa.c: New File.
	* mailbox/md5-rsa.h: New File.
	* mailbox/attachment.c (message_create_attachment): Remove
	the dependency from lib/basename.c
	* mailbox/mbx_mbox.c (mbox_tempfile): Remove
	the dependency from lib/basename.c

	* lib/signame.c: Replace in favor of the wellknown strsignal().
	* lib/strsignal.c: New file, use the mu_signame() written by
	Sergey.

	* pop3d/signal.c: Use strsignal() unconditionnaly.
	* imap4d/signal.c: Use strsignal() unconditionnaly.

	* configure.in: autoconf-2.50 is having difficulty parsing
	a long AC_CHECK_LIB, break it in two.
	Check for strsignal()

	* doc/auth.texi: Bug fixes in texinfo.
	* doc/Makefile.am: Commented the ex-address.texi generation.
	* doc/ex-address.texi: New file.

2001-05-21  Alain Magloire

	* configure.in, imap4d/signal.c, pop3d/signal.c:
	sys_siglist is not defined on some systems (namely, Solaris).
	* lib/signame.c: (added) Provide mu_signame() function to convert
	signal number to string representation.
	* lib/strtok_r.c: bugfix

2001-05-19  Alain Magloire

	* AUTHORS: Update to reflect Sergey and Sam contributions.

2001-05-20  Sergey Poznyakoff

	* mailbox/mbx_mboxscan.c:* Bug in mailbox/mbx_mboxscan.c made the
	stuff coredump upon encountering more than one subject in the header.

	* pop3d/pop3d.c: Typo.

2001-05-19  Sam Roberts

	* mailbox/parse822.c: parse822 is a little smarter in the way
	it handles CRLF.

2001-05-19  Alain Magloire

	* mailbox/mbx_default (mailbox_create_default):  Base on a
	suggestion/patch by Sam Roberts to provide tilde, plus and equal
	(~ + = ) expansion.
	* mailbox/address.c: Unfold field-bodies with NL.
	* mailbox/parse822.c (parse822_field_body): New function.
	(parse822_field_name): New function.

	* pop3d/user.c:  Use mailbox_create() now instead of
	mailbox_create_default.
	* pop3d/apop.c: Likewise.

2001-05-16  Dave Inglis

	* mailbox/mime.c (_mime_parse_mpart): Better check for the
	boundary.

2001-05-14  Sergey Poznyakoff

	* pop3d/user.c: After unsuccessful authorization frees cmd twice,

2001-05-13  Alain Magloire

	* imap4d/fetch.c:  Lots of bug fixing.  To many to enumerate.
	* imap4d/imap4d.h: New prototypes.
	* imap4d/login.c: syslog() the user.
	* imap4d/select.c: Remove the call to mailbox_create_default.
	* imap4d/util.c (util_getitem): New function.
	(util_send_qstring): New function.
	(util_send_literal): New function.

	* mailbox/address.c:  Parse822 can not handle '\n' inside
	the buffer, prune them out before.
	* mailbox/mime.c (_mime_parse_mpart_message): The mime->stream
	was destroy when doing mime_get_part () better get it every time.
	(_mime_body_fd): Likewised.
	* mailbox/smtp.c: Do not close the stream on destroy.

2001-05-11  Alain Magloire

	* imap4d/fetch.c: More cleanup in the bodystructure code,
	arrange response indentation etc ...
	* impa4d/utils.c (util_send_string): New helper function.

2001-05-10  Alain Magloire

	* imap4d/fetch.c: Implemented INTERNALDATE.
	* mailbox/mbx_imap.c (imap_envelope_date): ctime() always
	append a newline, nuke it.
	* mailbox/stream.c (stream_read): If the amount requested is bigger
	then the buffer cache size, bypass the buffering mechanism.

2001-05-09  Alain Magloire

	Take the missing pieces from the pop3d and make the
	imap4d a standalone daemon.

	* imap4d/fetch.c: Remove fetch_body_peek().
	and use fetch_body() instead.
	(fetch_operation): Malloc the entire message... not good.
	* imap4d/bye.c: New file.
	* imap4d/imap4d.c: Put the networking code taken from
	pop3d.c.
	* imap4d/lsub.c: Implemented.
	* imap4d/subscribe.c: Implemented.
	* imap4d/unsubscribe.c: Implemented.

	* pop3d/pop3d.c: pop3d_usage() move from extra.c
	* pop3d/signal.c: pop3d_signal () move from extra.c

	* mailbox/url_imap.c: It was not checking for the port number.
	* mailbox/filter_rfc822.c: Check for the lines if available.

2001-05-07  Alain Magloire

	Now we can have multiple access to the mailbox and the server
	will update the mailbox and send the unsollicited responses.
	This is implemented in imap4d/sync.c.

	* imap4d/copy.c: Move the code into imap4d_copy0() to allow
	the use of UID COPY.
	(imaprd_copy0): New function.
	* imap4d/fetch.c: Define a new structure command for FETCH.
	(fetch_getcommand): New function.
	(imap4d_fetch0): New function to allow the use of UID COPY.
	(fetch_envelope0): New function to permit to reuse the function
	in bodystructure.
	(fetch_bodystructure): Implemented.
	(fetch_bodystructure0): The implementation.
	(bodystructure): The helper function for fetch_bodystructure.
	* imap4d/imap4d.c (imap4d_mainloop): call imap4d_sync() in the
	mainloop.  Now use FILE *ifile.
	* imap4d/imap4d.h: Update prototypes.  Define ERR_NO_MEM and
	ERR_NO_OFILE.
	* imap4d/select.c (imap4d_select0): Call imap4d_sync() to update.
	* imap4d/store.c (ima4d_store): Cal imap4d_sync_flags() to
	update the flags in the uid_table.
	* imap4d/uid.c: Implemented.
	* imap4d/util.c (imap4d_readline):  Use fgets() and deal
	with literals send from the client.
	* imap4d/sync.c: New file.

	* include/mailutils/header.c: Added some new headers.
	* mailbox/attribute.c (attribute_copy): Do a shalow copy.
	* mailbox/file_stream.c: Check if FILE * is null in all functions.
	* mailbox/mailbox.c (mailbox_is_updated): Should not return ENOSYS
	but rather 1.

2001-05-07  Sam Roberts

	* mailbox/parse822.c: Now allow a unix mailbox in an address.
	* include/mailutils/parse822.h: Declare the function to parse them.
	* doc/address.texi: Document the fact.
	* doc/Makefile.am: Automatically build the example code from addr.c.
	* examples/addr.c: And update the parser test.
	* examples/Addrs.good: Update the parser test.

2001-05-03  Sam Roberts

	* mail/mail.c: Typo

2001-05-03  Alain Magloire

	* argp/argp-help.c (hol_entry_help): Some compiler like Watcomm
	can not initialize a local structure struct ..  = { .. }.  Do it
	explicitely field by field.
	* argp/arpg-parse.c: Watcomm choke on N_() macro.
	(parser_init): Watcomm does not like operation on a void * pointer.

	* imap4d/login.c: Cast the return of crypt(), since some platforms
	do not provide a prototype in <unistd.h>

	* pop3d/user.c: Cast the return of crypt(), since in may not be
	declare in <unistd.h>.

	* lib/snprintf.c: Use only __STDC__ to detect <stdarg.h>
	* lib/snprintf.h: Use only __STDC__.

	* mail/mail.h: The global variable should be declare extern.
	* mail/pipe.c: Use 512 buffer instead of BUFSIZ, go easy on the stack.
	* mail/print.c: Use 512 buffer instead of BUFSIZ, go easy on the stack.
	* mail/write.c: Use 512 buffer instead of BUFSIZ, go easy on the stack.

	* mailbox/folder_imap.c: Declare strtock_r ().

2001-05-03  Sergey Poznyakoff

	* pop3d/user.c: Misplace parentheses around the mailbox_xx() calls.
	Do not free (buf) since it is now static storage. Unfortunately most
	of the pam modules do openlog() on their own, thus after
	authentication all logging output flows to where the last pam module
	has directed it, which is usually `auth' facility.
	Put back closelog()/openlog().
	* pop3d/pop3d.h: ifile is now FILE *.
	pop3d_realine () take FILE * as a prototype.
	* pop3d/pop3d.c (pop3d_mainloop): Refresh lock, pop3d_touchlock().
	Register SIGALRM in the child.
	Do not free (buf) since it is now static storage.
	* pop3d/extra.c (pop3d_readline): Change to use
	fgets () and alarm ().
	With small modification from Alain.
	(pop3d_signal): ofile will be NULL in the *child* process:
	whereas in the parent one, ofile will always be NULL, since it lives
	in the BSS (FILE *ofile;) and gets initialized only in the child
	process. Thus, when the parent receives any signal, SIGTERM for
	example, it does pop3d_abquit(ERR_SIGNAL) and dies doing
	fprintf(ofile, ...)

2001-05-02  Alain Magloire

	Some of the Makefile.am contain gcc specific options
	like -Wall, -pedantic or -ansi remove them.

	* configure.in: Check for stdarg and sysconf.
	* mailbox/mime.c (_mime_set_content_type): Delayed the
	creation of the header-field content-type until the message
	is requested via mime_get_message().
	* pop3d/lock.: new File to implement the locking.
	* pop3d/apop.c: Rearrange the code around the #ifdefs
	to be clearrer.
	Make sure that when we use strncpy() that the buffer is
	null terminated.  Added the locking propose by Sergey to apop.
	* pop3d/capa.c: Announce we support PIPELINING.
	* pop3d/extra.c (pop3d_abquit): Remove ERR_DEAD_SOCK.
	Remove the extra fflush(), the call to exit()  always
	flush the buffers.
	(pop3d_readline):  Implement PIPELINING.
	* pop3d/pop3d.c:  Remove the typedef struct sockaddr SA
	for more clarity since it is not use that often.
	port is not longer a global variable.
	children should have the volatile qualification.

2001-04-29  Alain Magloire

	* pop3d/extra.c (pop3d_readline): Modify the loop to be able
	to support PIPELINING.
	* pop3d/capa.c: Advertise that we support PIPELINING.

2001-04-29  Sergey Poznyakoff

	Return values of all signal handlers are changed to RETSIGTYPE
	and configure.in is modified accordingly. This is more portable.

	* configure.in: New Macro AC_TYPE_SIGNAL.

	* mailbox/locker.c (locker_lock): while trying to read pid value
	from the pidfile passed wrong buffer length to read() call, namely:
	read(fd, buf, sizeof (pid_t)).

2001-04-29  Sergey Poznyakoff

	I have modified locker.c to implement reference count. The
	struct _locker is now:
	struct _locker { int fd; int refcnt; char *fname; int flags; };
	The refcnt member gets incremented each time locker_lock is called and
	decremented each time locker_unlock is called. Actual locking is
	performed only if refcnt == 0 on entry to locker_lock. Similarly,
	unlocking is performed only when refcnt gets decremented to 0 by
	locker_unlock. Also I have added basic support for NFS-secure
	locking.

	* mailbox/locker.c: Reference count implementation.

2001-04-25  Alain Magloire

	* imap4d/store.c: First implementation.
	* mailbox/attribute.c (attribute_unset_flags): New function.

2001-04-23  Sergey Poznyakoff

	* mailbox/mbx_mbox.c (mbx_expunge): It assumes that mbox_get_message()
	will place the pointer to message into mum->message member. But
	mbox_get_message() relies on 1-based message numbers, whereas `mum'
	pointer is obtained using 0-based indexing.

2001-04-23  Alain Magloire

	Sergey Poznyakoff noted: When the user's mailbox has zero size, mmap
	fails on Solaris. On GNU/Linux it reuturn NULL buf subsequent munmap
	fails.

	* mailbox/mapfile_stream.c:  To take care of this, mfs->ptr is set
	to NULL for len == 0;
	*mailbox/mbx_mbox.c (mbox_is_updated): Should I have return 0 (FALSE)
	when size change.

2001-04-23  Sergey Poznyakoff

	Several sources from mailbox subdirectory call fprintf(stderr,...)
	to issue error messages. As the stderr usually gets connected to
	the output socket, the client program receives all these error
	messages and gets confused, since they do not start with
	rfc-compliant +OK, -ERR keywords. So I have added a module
	error.c and changed all these fprintf's to error()'s. Actual
	function that ouputs the messages can be supplied by the
	application using error_set_print() call.

2001-04-23  Alain Magloire

	* pop3d/*.[ch]:  Rename all the pop function pop3d_xx()
	instead of pop3_xx() to be consistent with imap4d/*.

	* mailbox/mbx_pop.c (pop_user): This is sudden death; for many pop
	servers, it is important to let them time to remove locks or move
	the .user.pop files.  This happen when we do BUSY_CHECK().  For
	example, the user does not want to read the entire file, and wants
	start to read a new message, closing the connection and immediately
	contact the server again, and we'll end up having
	"-ERR Mail Lock busy" or something similar. To prevent this race
	condition we sleep 2 seconds.

2001-04-23  Sergey Poznyakoff

	It is often convenient to separate log outputs from POP and SMTP
	servers. --with-log-facility flag which allows to specify to which
	log facility the loggin output should be directed.
	System administrators often prefere to have more information about
	unsuccessfull authentications. I have added more verbose logging
	to pop3d/user.c. Both failed attempts and possible account probes
	(USER immediately followed by QUIT) are logged.
	Made pop3d to be less verbose about its WELCOME prompt. When the
	symbol TERSE_MODE is defined, pop3d introduces itself just as
	+OK POP3 ready <apop_hash>
	insead of divulging its type and version. This is a bit paranoid,
	but it is better to be on the safe side...

	* configure.in: ARGPINC gets assigne a relative path, due
	to which the compilation fails if the package is configure with
	--srdir=<path> option.
	* configure.in: --with-log-facility new option.
	* acconfig.h: LOG_FACILITY

	* doc/mailutils.texi: Typo.

	* mailbox/mapfile_stream.c: Define MAP_FAILED.

	* pop3d/extra.c (pop3_abquit): new case ERR_MBOX_SYNC.
	(pop3_signal): Syslog the reason.
	* pop3d/pop3d.c (pop_mainloop): Syslog the hostname of
	the user on connect.
	(pop3_daemon): Log to many children.  Lacks call to exit(), so if
	pop3d is run as a daemon, any child after exiting from
	pop3_mainloop  tries to accept() from already closed socket
	and issues spurious error messages.
	(pop3_mainloop):  Check if the mailbox is uptodate if not
	and the size shrink, bail out.  Do not send version number.
	* pop3d/pop3d.h: ERR_MBOX_SYNC define. WELCOME removed.
	* pop3d/signal (pop3_sigchld): Lacks signal() call, due to which
	the signal handler gets cleared after first SIGCHLD and all
	subsequent children, when finished, just hang around like zombies.
	* pop3d/user.c: Log to LOG_FACILITY all the errors.

2001-04-23  Alain Magloire

	Sergey Poznyakoff pointed out that errno changes depending
	if _REENTRANT is set or not.  So for enable thread we take
	the approach of always defining _REENTRANT.
	He also noted that when in standalone the child was not exiting.

	* acconfig.h: Define _REENTRANT.
	* configure.in: Check for sigaction().
	* configuire.in: AC_DEFINE(_REENTRANT).

	* doc/Makefile.am: add rfc2060-errata.
	* doc/rfc2060-errata: New File.

	* imap4d/copy.c: First Implementation.
	* imap4d/status.c: First implementation.

	* mailbox/file_stream.c (_file_open): For CREAT, close
	the fd if we failed.
	* mailbox/folder_imap.c: Remove the _REENTRANT.
	* mailbox/mbx_mbox.c: Remove the _REENTRANT.
	* mailbox/monitor.c: Remove the _REENTRANT.

	* pop3d/pop3d.c (main): maxchildren boosted to 20.
	(pop3_daemon_init): Use sigaction() for SIGCHLD,
	the sematics of signal() is unreliable on some platforms.
	* pop3d/signal.c: Save errno.

2001-04-22  Alain Magloire

	* imap4d/create.c: First implementation.
	* imap4d/delete.c: First implementation.
	* imap4d/list.c: First implementation.
	* imap4d/rename.c: First implementation.
	* imap4d/util.c: New functions.
	(util_tilde_expansion): expand ~.
	(util_unquote): Remove surrounding double quotes.
	(util_getfullpath): Expand the path to absolute.
	* imap4d/fetch.c:  Did not cycle throught the items.
	(fetch_send_address): Patch from Sam Roberts, did not
	use the index.

	* mailbox/attachement.c (message_unencapsulate): Little buglet
	strncasemp() passing the wrong size.

2001-04-19  Alain Magloire

	* mailbox/smtp.c(smtp_readline): Because of the buffering mechanism,
	we must maintain the offset.

	* imap4d/list.c: partially implemented the LIST command.
	* imap4d/imap4d.c: homedir new global variable.
	* imap4d/login.c: same ${HOME} in homedir.
	* imap4d/util.c (util_getword): Be aware of the quotes.

	* lib/fnmatch.c: New replacement file.
	* lib/fnmatch.h: New replacement file.
	* configure.in: Check for fnmatch().

2001-04-18  Alain Magloire

	Finally took time to put the code in from Jakob first draft, in
	an email excerpt:
	states is the valid states for a command (eg. LOGIN is only valid in
	non-authenticated state, SELECT is valid in authenticated or
	selected). success is the state to enter when the command completes
	successfully (STATE_NONE means no change) and failure is the state to
	enter when the command fails.

	* imap4d/*.c:  All the commands check there state.
	* imap4d/fetch.c: Cleanup the fetch code, and broke
	the fetch_operation() routine in multiple routines.
	(fetch_message): New function.
	(fetch_header): Likewised
	(fetch_content): Likewised
	(fetch_io): Likewised
	(fetch_header_fields): Likewised
	(fetch_header_fields_not): Likewised
	(fetch_send_address): Likewised

	* mailbox/header.c: Some functions were usefull while
	programming the imap server, put them here.
	(header_aget_value): New function.
	(header_aget_field_name): New function.
	(header_aget_field_value): New function.

	* mailbox/memory_stream.c: New file, implemented a
	malloc() buffer that you can access via the stream interface.
	* mailbox/file_stream.c: Remove spurious checks.
	* mailbox/mapfile_stream.c: Remove spurious checks.
	(_mapfile_read): check if there is no newline left.

2001-04-16  Alain Magloire

	To get things to compile on Solaris, change configure to check
	for -lpthread since in libc the thread functions are defined
	but all return ENOSYS, you need to explicitely link with -lphtread.
	the ctype functions is*() arguments should be explicitely cast
	since Solaris use them as indexes.  __REENTRANT as to be define
	if compile with support for threads.  Never realize this but
	setenv() is a BSD/GNU thing, so took a variant from libiberty
	to cope.

	* configure.in: Check for setenv. First check if -lphtread is ok.
	* lib/setenv.c: New functions.
	* lib/Makefile.am: add setenv.c in EXTRA_DIST.
	* imap4d/imap4d.h: Include <alloca.h>
	* mailbox/attachment.c: Include <alloca.h>
	* (_header_get_param): isspace() cast argument.
	* mail/mail.h: check if <paths.h> is available if not
	define _PATH_SENDMAIL=/usr/lib/sendmail.
	* mailbox/folder_imap.c: if pthread available, define _REENTRANT.
	Include <alloca.h>.
	(imap_bodystructure0): isdigit() cast argument.
	* mailbox/mbx_mbox.c: if pthread available, define _REENTRANT.
	Include <alloca.h>.
	* mailbox/parse822.c: isdigit() cast argument unsigned.

2001-04-15  Alain Magloire

	The FILE* stream "stdout" is not an lvalue so it is an error to
	attempt to assign to it.  To be able to redirect at will stdout
	we need to assign it.  In GNU lib C, it was not error since stdout
	stderr, and stdin are variables, but to be portable we can not
	assume this.  The way out is to always use fprintf () and have
	a global varialbe "ofile" pointing to stdout.

	* mail/*: All the files under mail been change to use fprintf()
	and ofile as the default stdout.
	Copyright updated.

2001-04-15  Alain Magloire

	Create a argp directory, it contains the necessary
	files to build a standalone libargp.a

	* argp: New directory.
	argp-ba.c, argp-eexst.c, argp-fmtstream.c, argp-fmtstream.h
	argp-fs-xinl.c, argp-help.c, argp-namefrob.h, argp-parse.c
	argp-pv.c, argp-pvh.c, argp-xinl.c, argp.h, pin.c.

	* mail/mail.c:  Comment out the code that use readline
	specifics WITH_READLINE.
	* mail/mail.h: Likewised.
	* mail/util.c: Likewised.

2001-04-15  Alain Magloire

	* Makefile.am: Add argp in the list of subdirs.
	* configure.am:  Check for argp.h and look for
	argp_parse().
	* lib/strchrnul.c: New function.
	* lib/strndup.c: New function.
	* lib/strnlen.c: New function.
	* lib/vasnprintf.c: New function.
	* lib/getopt.c: Updated.
	* lib/getopt1.c: Updated.
	* lib/getopt.h: Updated.
	* frm/Makefile.am: Remove -DTESTING in CFLAGS.
	* from/Makefile.am: Remove -DTESTING in CFLAGS.
	Add AUTOMAKE_OPTIONS.
	* imapd/Makefile.am: Likewised.
	* pop3d/Makefile.am: Likewised.
	* mail/Makefile.am: Likewised. Added ARGPLIB macro

2001-04-14  Sam Roberts
	* examples/{Makefile,Addrs,addr.c,Addrs.good}: address test f/w.
	* include/mailutils/address.h,mailbox/{address.c,parse822.c}: now
	  stuff a group name into an _address, and added a function to do
	  a quick check if it is a group.
	* mailbox/parse822.c: fixed bug where ",sam@foo.bar" wasn't valid.

2001-04-14  Alain Magloire

	* mailbox/folder_imap.c: When calling imap_writeline () the
	cookie for the tag should be unsigned %d --> %u.
	(imap_send) : The number of bytes in memmove was wrong.
	* mailbox/mbx_imap.c: Some duplicate degug calls MAILBOX_DEBUG0()
	removed.
	(attribute_string): IMAP does not have a \\Read flag it should be
	the same as \\Seen so attribute_read() == attribute_seen().
	(flag_string): New function.
	(imap_attr_set_flags): Use flag_string(), instead.
	* mailbox/include/imap0.h:  CLEAR_STATE() should also deselect
	the current mailbox.

	* mailbox/mbx_pop.c (pop_write): The number of bytes in the memmove
	was wrong.

	* imap4d/imap4d.h: Add HAVE_SECURITY_PAM_APPL_H.
	* imap4d/login.c: PAM_ERROR wrongly define.
	* imap4d/expunge.c: Initialise variable sp.
	* imap4d/logout.c: Initialise variable sp.
	* imap4d/noop.c: Initialise variable sp.

	* mailbox/attachement.c (message_create_attachment): Use base_name().
	* mailbox/mbx_mbox.c (mbox_tmpfile): Use base_name().
	* configure.in: AC_REP_FUNC(vasprintf strcasecmp strncasecmp).
	* include/mailutils/Makefile.am: Add property.h, parse822.h.
	* lib/vasprintf.c: Taken from libit.
	* lib/basename.c: Taken from libit/fileutils.
	* lib/Makefile.am.c: Always use our basename(base_name).
	(AM_INIT_AUTOMAKE): Change version to 0.0.9

2001-04-13  Sam Roberts

	QNX needed to include <strings.h> for many of the useful string
	functions also to define _QNX_SOURCE so <sys/time.h> doesn't have
	an internal warning.

	* configure.in: Check for libgen.h.
	* imap4d/imap4d.h: Define __QNX_SOURCE.
	* mailbox/mime.c: wasn't including config.h
	* mailbox/attachment.c: QNX needed libgen.h for basename(),
	include <strings.h> if define.
	* mailbox/filter.c: Include <strings.h>.
	* mailbox/mbx_mbox.c: Include <strings.h>.
	* mailbox/folder_imap.c: Include <strings.h>.
	* mailbox/header.c: Include <strings.h>.
	* mailbox/property.c: Include <strings.h>.
	* mailbox/registrar.c: Include <strings.h>.
	* mailbox/url.c: Include <strings.h>.
	* mailbox/url_pop.c: Include <strings.h>.
	* pop3d/user.c: QNX says getspnam(char* n), I cast away the error.

2001-04-13  Sam Roberts

	* mailbox/parse822.c, include/mailutils/parse822.h: now can
	  quote the local-part of and addr-spec, and a string.

2001-04-13  Sam Roberts

	* doc/address.texi: updated docs, now they match the parse822.
	* mailbox/parse822.c: small tweaks to the new parser, the changes
	  made during the tidying over the last month were:
	  - use C comments only.
	  - don't use C++ reserved words.
	  - fix is_digit() to be like the other is functions
	  - Changed return codes to:
	   . no mem (ENOMEM)
	   . function wasn't called correctly, usually a missing
	     argument (EINVAL)
	   . invalid syntax found during parsing (ENOENT)
	   . success == 0
	  - const-corrected the APIs
	  - removed unnecessary (in C) casts.
	  - mailbox_t* removed in favor of address_t.
	  - fix handful of memory leaks detected by Alain.

2001-04-10  Alain Magloire

	* pop3d/retr.c (pop3_retr): Typo.
	* pop3d/top.c (pop3_top): No need to reallocate when sending the
	headers.
	* doc/mailbox.texi: Put the functions in alphabetic orders.

2001-04-10  Alain Magloire

	* mailbox/Makefile.am: filter_trans.c added, trans_stream.c deleted.
	* mailbox/attachment.c (message_create_attachment): use
	filter_create().
	(message_save_attachment): use filter_create().
	* mailbox/body.c (body_set_lines): Wrong comparison for the owner.
	* mailbox/mbx_mbox.c: Do not count the line separtor of part
	of the mailbox.

	* mailbox/url.c (url_is_same_sheme): New function.
	(url_is_same_user): New function.
	(url_is_same_path): New function.
	(url_is_same_host): New function.
	(url_is_same_port): New function.
	* mailbox/folder.c : Moved the is_same_*() functions in url.c
	they can be generally usefull.
	(is_same_sheme): Removed.
	(is_same_user): Removed.
	(is_same_path): Removed.
	(is_same_host): Removed.
	(is_same_port): Removed.

	* mailbox/folder_imap.c (folder_imap_create): New function,
	CREATE a new mailbox.
	(folder_imap_open): Calls folder_imap_create when the MU_STREAM_CREAT
	flag is set.
	* mailbox/mbx_imap.c: Appending messages implemented, if the message
	comes from the same imap folder, it is COPY otherwise APPEND.
	(is_same_folder): New function.
	(imap_append_message): Implemented.
	(attribute_string): New functions.
	(imap_copy_message): New function.
	* mailbox/include/imap0.h: New enum, IMAP_APPEND, IMAP_APPEND_ACK,
	IMAP_APPEND_CONT, IMAP_APPEND_SEND, IMAP_COPY, IMAP_COPY_ACK,
	IMAP_CREATE, IMAP_CREATE_ACK.

2001-04-06  Alain Magloire

	* mailbox/parse822.c: New parser.
	* include/mailutils/parse822.h: New file.
	* mailbox/address.c (address_create): Remove the old parsing and use
	parse822 as the underlying engine.
	(address_parse): Removed.
	(gettoken): Removed.
	(quotes): Removed.
	(address_get_personal): Remove the code to unquote, parse822 takes
	care if it. Return value when no field is ENOENT.
	(address_get_comments): Return value when no field ENOENT.
	(address_get_local_part): Return value when no field ENOENT.
	(address_get_domain): Return value when no field ENOENT.
	(address_get_email): Return value when no field ENOENT.
	(address_get_route): Return value when no field ENOENT.
	* mailbox/message.c (message_sender): Use parse822 to retrieve
	the email from the From: field.
	(message_set_mailbox): New function.
	* mailbox/misc.c : Removed the old parsing code.
	(gettoken): Removed.
	(parseaddr): Removed.
	* mailbox/include/misc.h : Removed parseaddr() prototypes.
	From Sam Roberts, the new parse822 parser..

2001-04-04  Alain Magloire

	Introduction of the notion of filter_t object takes a stream and
	perform some filtering on it.  All the decoding streams will move
	to this i.e. quoted-printable, base64 etc .. This scheme will also
	permit users to add to the list new filters.  Still work in progress.

	* mailbox/Makefile.am : Add filter.c filter_rfc822.c.
	* mailbox/body.c : When creating a floating body i.e creating
	a temporary file, the stream was not "own" by the body_t.
	(_body_get_fd): Likewised.
	(_body_read):_ Likewised.
	(_body_readline): Likewised.
	(_body_write): Likewised.
	(_body_truncate): Likewised.
	(_body_size): Likewised.
	(_body_flush): Likewised.

	* mailbox/folder_imap.c (imap_literal_string): Check if the
	callback.buffer is NULL.
	(imap_body): Do no set the callback.type if "FIELDS" is part of the
	string.

	* mailbox/header.c: Remove the support for RFC822 it will be part
	of the filter_t object.
	* mailbox/mbx_mbox.c: Likewised.
	* mailbox/mailbox.c (mailbox_size): Rename to mailbox_get_size().

	* mailbox/stream.c (stream_is_seekable): New function.
	(stream_set_property): New function.
	(stream_get_property): New function.

	* mailbox/trans_stream.c: Beautify.

	* include/mailutils/filter.h: new file.

	* doc/mailbox.texi: Updated.
	More changes to come.

2001-03-20  Alain Magloire

	* mailbox/folder_imap.c (imap_readline) :  If the server goes away
	suddenly return an error.
	* mailbox/smtp.c (smtp_readline) :  If the server goes away
	suddenly return an error.
	* mailbox/mbx_pop.c (pop_readline) :  If the server goes away suddenly
	return an error.
	* mailbox/mbx_pop.c (pop_open) : The ticket comes from the folder.

2001-03-17  Vesselin Atanasov

	* configure.in: AC_REQUIRE is not .. required.  Just call
	jm_FUNC_MALLOC and jm_FUNC_REALLOC.

2001-03-17  Alain Magloire

	Clean the property object, mailbox and mailer have property object
	that you can examine.  Still a draft: the value of objects are ints.
	This feature was put in to help the imap4d server, in this protocol
	you can get a substring of the message starting from a certain offset.
	To make the coding of imap4d simpler the complexity was move to the

	* mailbox/smtp.c(smtp_readline): Because of the buffering mechanism,
	we must maintain the offset.

	* imap4d/list.c: partially implemented the LIST command.
	* imap4d/imap4d.c: homedir new global variable.
	* imap4d/login.c: same ${HOME} in homedir.
	* imap4d/util.c (util_getword): Be aware of the quotes.

	* lib/fnmatch.c: New replacement file.
	* lib/fnmatch.h: New replacement file.
	* configure.in: Check for fnmatch().

2001-04-18  Alain Magloire

	Finally took time to put the code in from Jakob first draft, in
	an email excerpt:
	states is the valid states for a command (eg. LOGIN is only valid in
	non-authenticated state, SELECT is valid in authenticated or
	selected). success is the state to enter when the command completes
	successfully (STATE_NONE means no change) and failure is the state to
	enter when the command fails.

	* imap4d/*.c:  All the commands check there state.
	* imap4d/fetch.c: Cleanup the fetch code, and broke
	the fetch_operation() routine in multiple routines.
	(fetch_message): New function.
	(fetch_header): Likewised
	(fetch_content): Likewised
	(fetch_io): Likewised
	(fetch_header_fields): Likewised
	(fetch_header_fields_not): Likewised
	(fetch_send_address): Likewised

	* mailbox/header.c: Some functions were usefull while
	programming the imap server, put them here.
	(header_aget_value): New function.
	(header_aget_field_name): New function.
	(header_aget_field_value): New function.

	* mailbox/memory_stream.c: New file, implemented a
	malloc() buffer that you can access via the stream interface.
	* mailbox/file_stream.c: Remove spurious checks.
	* mailbox/mapfile_stream.c: Remove spurious checks.
	(_mapfile_read): check if there is no newline left.

2001-04-16  Alain Magloire

	To get things to compile on Solaris, change configure to check
	for -lpthread since in libc the thread functions are defined
	but all return ENOSYS, you need to explicitely link with -lphtread.
	the ctype functions is*() arguments should be explicitely cast
	since Solaris use them as indexes.  __REENTRANT as to be define
	if compile with support for threads.  Never realize this but
	setenv() is a BSD/GNU thing, so took a variant from libiberty
	to cope.

	* configure.in: Check for setenv. First check if -lphtread is ok.
	* lib/setenv.c: New functions.
	* lib/Makefile.am: add setenv.c in EXTRA_DIST.
	* imap4d/imap4d.h: Include <alloca.h>
	* mailbox/attachment.c: Include <alloca.h>
	* (_header_get_param): isspace() cast argument.
	* mail/mail.h: check if <paths.h> is available if not
	define _PATH_SENDMAIL=/usr/lib/sendmail.
	* mailbox/folder_imap.c: if pthread available, define _REENTRANT.
	Include <alloca.h>.
	(imap_bodystructure0): isdigit() cast argument.
	* mailbox/mbx_mbox.c: if pthread available, define _REENTRANT.
	Include <alloca.h>.
	* mailbox/parse822.c: isdigit() cast argument unsigned.

2001-04-15  Alain Magloire

	The FILE* stream "stdout" is not an lvalue so it is an error to
	attempt to assign to it.  To be able to redirect at will stdout
	we need to assign it.  In GNU lib C, it was not error since stdout
	stderr, and stdin are variables, but to be portable we can not
	assume this.  The way out is to always use fprintf () and have
	a global varialbe "ofile" pointing to stdout.

	* mail/*: All the files under mail been change to use fprintf()
	and ofile as the default stdout.
	Copyright updated.

2001-04-15  Alain Magloire

	Create a argp directory, it contains the necessary
	files to build a standalone libargp.a

	* argp: New directory.
	argp-ba.c, argp-eexst.c, argp-fmtstream.c, argp-fmtstream.h
	argp-fs-xinl.c, argp-help.c, argp-namefrob.h, argp-parse.c
	argp-pv.c, argp-pvh.c, argp-xinl.c, argp.h, pin.c.

	* mail/mail.c:  Comment out the code that use readline
	specifics WITH_READLINE.
	* mail/mail.h: Likewised.
	* mail/util.c: Likewised.

2001-04-15  Alain Magloire

	* Makefile.am: Add argp in the list of subdirs.
	* configure.am:  Check for argp.h and look for
	argp_parse().
	* lib/strchrnul.c: New function.
	* lib/strndup.c: New function.
	* lib/strnlen.c: New function.
	* lib/vasnprintf.c: New function.
	* lib/getopt.c: Updated.
	* lib/getopt1.c: Updated.
	* lib/getopt.h: Updated.
	* frm/Makefile.am: Remove -DTESTING in CFLAGS.
	* from/Makefile.am: Remove -DTESTING in CFLAGS.
	Add AUTOMAKE_OPTIONS.
	* imapd/Makefile.am: Likewised.
	* pop3d/Makefile.am: Likewised.
	* mail/Makefile.am: Likewised. Added ARGPLIB macro

2001-04-14  Sam Roberts
	* examples/{Makefile,Addrs,addr.c,Addrs.good}: address test f/w.
	* include/mailutils/address.h,mailbox/{address.c,parse822.c}: now
	  stuff a group name into an _address, and added a function to do
	  a quick check if it is a group.
	* mailbox/parse822.c: fixed bug where ",sam@foo.bar" wasn't valid.

2001-04-14  Alain Magloire

	* mailbox/folder_imap.c: When calling imap_writeline () the
	cookie for the tag should be unsigned %d --> %u.
	(imap_send) : The number of bytes in memmove was wrong.
	* mailbox/mbx_imap.c: Some duplicate degug calls MAILBOX_DEBUG0()
	removed.
	(attribute_string): IMAP does not have a \\Read flag it should be
	the same as \\Seen so attribute_read() == attribute_seen().
	(flag_string): New function.
	(imap_attr_set_flags): Use flag_string(), instead.
	* mailbox/include/imap0.h:  CLEAR_STATE() should also deselect
	the current mailbox.

	* mailbox/mbx_pop.c (pop_write): The number of bytes in the memmove
	was wrong.

	* imap4d/imap4d.h: Add HAVE_SECURITY_PAM_APPL_H.
	* imap4d/login.c: PAM_ERROR wrongly define.
	* imap4d/expunge.c: Initialise variable sp.
	* imap4d/logout.c: Initialise variable sp.
	* imap4d/noop.c: Initialise variable sp.

	* mailbox/attachement.c (message_create_attachment): Use base_name().
	* mailbox/mbx_mbox.c (mbox_tmpfile): Use base_name().
	* configure.in: AC_REP_FUNC(vasprintf strcasecmp strncasecmp).
	* include/mailutils/Makefile.am: Add property.h, parse822.h.
	* lib/vasprintf.c: Taken from libit.
	* lib/basename.c: Taken from libit/fileutils.
	* lib/Makefile.am.c: Always use our basename(base_name).
	(AM_INIT_AUTOMAKE): Change version to 0.0.9

2001-04-13  Sam Roberts

	QNX needed to include <strings.h> for many of the useful string
	functions also to define _QNX_SOURCE so <sys/time.h> doesn't have
	an internal warning.

	* configure.in: Check for libgen.h.
	* imap4d/imap4d.h: Define __QNX_SOURCE.
	* mailbox/mime.c: wasn't including config.h
	* mailbox/attachment.c: QNX needed libgen.h for basename(),
	include <strings.h> if define.
	* mailbox/filter.c: Include <strings.h>.
	* mailbox/mbx_mbox.c: Include <strings.h>.
	* mailbox/folder_imap.c: Include <strings.h>.
	* mailbox/header.c: Include <strings.h>.
	* mailbox/property.c: Include <strings.h>.
	* mailbox/registrar.c: Include <strings.h>.
	* mailbox/url.c: Include <strings.h>.
	* mailbox/url_pop.c: Include <strings.h>.
	* pop3d/user.c: QNX says getspnam(char* n), I cast away the error.

2001-04-13  Sam Roberts

	* mailbox/parse822.c, include/mailutils/parse822.h: now can
	  quote the local-part of and addr-spec, and a string.

2001-04-13  Sam Roberts

	* doc/address.texi: updated docs, now they match the parse822.
	* mailbox/parse822.c: small tweaks to the new parser, the changes
	  made during the tidying over the last month were:
	  - use C comments only.
	  - don't use C++ reserved words.
	  - fix is_digit() to be like the other is functions
	  - Changed return codes to:
	   . no mem (ENOMEM)
	   . function wasn't called correctly, usually a missing
	     argument (EINVAL)
	   . invalid syntax found during parsing (ENOENT)
	   . success == 0
	  - const-corrected the APIs
	  - removed unnecessary (in C) casts.
	  - mailbox_t* removed in favor of address_t.
	  - fix handful of memory leaks detected by Alain.

2001-04-10  Alain Magloire

	* pop3d/retr.c (pop3_retr): Typo.
	* pop3d/top.c (pop3_top): No need to reallocate when sending the
	headers.
	* doc/mailbox.texi: Put the functions in alphabetic orders.

2001-04-10  Alain Magloire

	* mailbox/Makefile.am: filter_trans.c added, trans_stream.c deleted.
	* mailbox/attachment.c (message_create_attachment): use
	filter_create().
	(message_save_attachment): use filter_create().
	* mailbox/body.c (body_set_lines): Wrong comparison for the owner.
	* mailbox/mbx_mbox.c: Do not count the line separtor of part
	of the mailbox.

	* mailbox/url.c (url_is_same_sheme): New function.
	(url_is_same_user): New function.
	(url_is_same_path): New function.
	(url_is_same_host): New function.
	(url_is_same_port): New function.
	* mailbox/folder.c : Moved the is_same_*() functions in url.c
	they can be generally usefull.
	(is_same_sheme): Removed.
	(is_same_user): Removed.
	(is_same_path): Removed.
	(is_same_host): Removed.
	(is_same_port): Removed.

	* mailbox/folder_imap.c (folder_imap_create): New function,
	CREATE a new mailbox.
	(folder_imap_open): Calls folder_imap_create when the MU_STREAM_CREAT
	flag is set.
	* mailbox/mbx_imap.c: Appending messages implemented, if the message
	comes from the same imap folder, it is COPY otherwise APPEND.
	(is_same_folder): New function.
	(imap_append_message): Implemented.
	(attribute_string): New functions.
	(imap_copy_message): New function.
	* mailbox/include/imap0.h: New enum, IMAP_APPEND, IMAP_APPEND_ACK,
	IMAP_APPEND_CONT, IMAP_APPEND_SEND, IMAP_COPY, IMAP_COPY_ACK,
	IMAP_CREATE, IMAP_CREATE_ACK.

2001-04-06  Alain Magloire

	* mailbox/parse822.c: New parser.
	* include/mailutils/parse822.h: New file.
	* mailbox/address.c (address_create): Remove the old parsing and use
	parse822 as the underlying engine.
	(address_parse): Removed.
	(gettoken): Removed.
	(quotes): Removed.
	(address_get_personal): Remove the code to unquote, parse822 takes
	care if it. Return value when no field is ENOENT.
	(address_get_comments): Return value when no field ENOENT.
	(address_get_local_part): Return value when no field ENOENT.
	(address_get_domain): Return value when no field ENOENT.
	(address_get_email): Return value when no field ENOENT.
	(address_get_route): Return value when no field ENOENT.
	* mailbox/message.c (message_sender): Use parse822 to retrieve
	the email from the From: field.
	(message_set_mailbox): New function.
	* mailbox/misc.c : Removed the old parsing code.
	(gettoken): Removed.
	(parseaddr): Removed.
	* mailbox/include/misc.h : Removed parseaddr() prototypes.
	From Sam Roberts, the new parse822 parser..

2001-04-04  Alain Magloire

	Introduction of the notion of filter_t object takes a stream and
	perform some filtering on it.  All the decoding streams will move
	to this i.e. quoted-printable, base64 etc .. This scheme will also
	permit users to add to the list new filters.  Still work in progress.

	* mailbox/Makefile.am : Add filter.c filter_rfc822.c.
	* mailbox/body.c : When creating a floating body i.e creating
	a temporary file, the stream was not "own" by the body_t.
	(_body_get_fd): Likewised.
	(_body_read):_ Likewised.
	(_body_readline): Likewised.
	(_body_write): Likewised.
	(_body_truncate): Likewised.
	(_body_size): Likewised.
	(_body_flush): Likewised.

	* mailbox/folder_imap.c (imap_literal_string): Check if the
	callback.buffer is NULL.
	(imap_body): Do no set the callback.type if "FIELDS" is part of the
	string.

	* mailbox/header.c: Remove the support for RFC822 it will be part
	of the filter_t object.
	* mailbox/mbx_mbox.c: Likewised.
	* mailbox/mailbox.c (mailbox_size): Rename to mailbox_get_size().

	* mailbox/stream.c (stream_is_seekable): New function.
	(stream_set_property): New function.
	(stream_get_property): New function.

	* mailbox/trans_stream.c: Beautify.

	* include/mailutils/filter.h: new file.

	* doc/mailbox.texi: Updated.
	More changes to come.

2001-03-20  Alain Magloire

	* mailbox/folder_imap.c (imap_readline) :  If the server goes away
	suddenly return an error.
	* mailbox/smtp.c (smtp_readline) :  If the server goes away
	suddenly return an error.
	* mailbox/mbx_pop.c (pop_readline) :  If the server goes away suddenly
	return an error.
	* mailbox/mbx_pop.c (pop_open) : The ticket comes from the folder.

2001-03-17  Vesselin Atanasov

	* configure.in: AC_REQUIRE is not .. required.  Just call
	jm_FUNC_MALLOC and jm_FUNC_REALLOC.

2001-03-17  Alain Magloire

	Clean the property object, mailbox and mailer have property object
	that you can examine.  Still a draft: the value of objects are ints.
	This feature was put in to help the imap4d server, in this protocol
	you can get a substring of the message starting from a certain offset.
	To make the coding of imap4d simpler the complexity was move to the
	library.  It is possible now by setting a property of the mailbox
	to make it output rfc822 stream i.e. "\r\n" terminated stream, the
	offset and the size are also in term of rfc822.

	* mailbox/property.c (property_set_int): Removed.
	* mailbox/property.c (property_set_long): Removed.
	* mailbox/property.c (property_set_double): Removed.
	* mailbox/property.c (property_set_set_value): Removed.
	* mailbox/property.c (property_set_get_value): Removed.
	* mailbox/property.c (property_add_propety): New function.
	* mailbox/property.c (hash): Renamed poperty_hash.
	* include/mailutils/property.h (struct property_list): New structure.

	* mailbox/include/mailbox0.h: new fields properties, properties_count.
	* mailbox/mailbox.c (mailbox_get_property): The function will create
	the proprety and add the default properties.
	(mailbox_destroy): The default poperties and property are freed.
	(mailbox_is_updated): Return ENOSYS if the argumets are wrong.
	(mailbox_scan): Return ENOSYS if the argumets are wrong.
	(mailbox_uidvalidity): Return ENOSYS if the argumets are wrong.
	(mailbox_uidnext): Return ENOSYS if the argumets are wrong.

	* mailbox/mbx_mbox.c (mbx_init): Set its default properties.
	(mbx_header_get_fvalue): Return the len, even if buffer is null.
	(mbx_body_read): If property rfc822 is set call
	mbx_body_readstream_rfc822 to the conversion.
	(mbx_body_readstream_rfc822): New function, do the conversion.
	(struct _mbox_message): Remove the stream field.
	added struct rfc822.
	(mbox_get_header_readstream): Removed.
	(mbox_header_size): Do the conversion if rfc822 set.
	(mbox_body_size): Do the conversion if rfc822 set.
	(mbox_get_message): Set the property on the header_t.

	* mailbox/mbx_pop.c (pop_init): Set its default properties.
	(pop_open): Remove MU_STREAM_POP flag obsolete.
	(pop_readline):  Do the converstion if rfc822 is set.

	* mailbox/mbx_imap.c (mbx_imap_init): Set its default properties.
	* mailbox/folder_imap.c (folder_imap_open): Remove MU_STREAM_IMAP,
	no longer pertinent.
	(imap_readline): If propety rfc822 is set don't strip '\r'.

	* mailbox/header.c (header_set_property): New functions.
	(header_get_property): New functions.
	(header_destroy): Destroy property object.
	(header_get_value): If property rfc822 is set
	convert all "\n" to "\r\n".
	(header_read): If property rfc822 is et convert to \n to \r\n.
	(header_readline): If property rfc822 is et convert to \n to \r\n.
	(fill_blurb): Clear the function overloading, when the blurb is fill.
	* mailbox/include/header0.h: New field property.
	* include/mailutils/header.h: Added prototypes for
	header_set_property and header_get_property.

	* include/mailutils/stream.h: Remove the identification macros;
	MU_STREAM_IMAP, MU_STREAM_FILE, MU_STREAM_POP, it is part of the
	properties of each object.

	* mailbox/mailer.c (mailer_destroy): Free the properties.
	* mailbox/mailer.c (mailer_get_poperty): New function, return the
	property of the mailbox.

	* mailbox/smtp.c (_mailer_smtp_init): Set its default properties.
	* mailbox/sendmail.c (_sendmail_init): Set its default properties.

	* mailbox/include/Makefile.am: Add property0.h.

2001-03-09  Sam Roberts

	* include/mailutils/address.h: api for new parser,
	address_create0(), and to get route, local-part, and domain.
	* mailbox/address.c: implementation of 3 new get functions, first
	cut, needs cleanup
	* mailbox/include/address0.h: new members of _address, deleted
	one that looked unused.
	* mailbox/parse822.c: implementation of address_create0(),
	which handles groups, routes, and the hoary old comment phrase
	* addr/addr.c - parses addresses from its command line or
	stding using create() or create0().
	* mailbox/mbx_imap.c: need strings.h on some systems, like Nto

2001-03-12  Sam Roberts

	* frm/frm.c (main): Changed to only print subject if
	header_get_value(SUBJECT) returned success, otherwise I assume
	it would print the stack.
	(usage): Corrected a tiny typo in usage message.
	(long_options): Added an option -f,--field that prints the named field
	in the mailbox, and nothing else.

2001-03-09  Alain Magloire

	* mailbox/Makefile.am: add property.c in the src list.
	* doc/mailutils.texi: add Sam to the list of acknowlegment.

2001-03-09  Sam Roberts

	* doc/address.texi: documented all the functions in address.h
	* doc/url.texi: corrected location or url.h header

2001-03-08  Sam Roberts

	* README-alpha:  Be clearer on how to configure.
	* doc/address.texi : New File, description of address_t object.
	* doc/mailutils.texi : add include address.texi.

2001-03-03  Alain Magloire

	* imap4d/fetch.c (fetch_operation) : HEADER.FIELDS.NOT implemented.
	fetch_opertaion() take a new argument.
	* imap4d/util.c (util_upper) : New function string upper.

	* mailbox/heder.c: Added new functionnalities to help the imap4d
	fetch command.
	(header_get_field_count) : New function returns the number of header
	fields in the header.
	(header_get_field_name): New function returns the field name.
	(header_get_field_value): New function returns the field value.

2001-03-03  Alain Magloire

	* include/mailutils/address.h: s/_cplusplus/__cplusplus/g
	(include/mailutils/auth.h): Likewised.
	(include/mailutils/body.h): Likewised.
	(include/mailutils/debug.h): Likewised.
	(include/mailutils/header.h): Likewised.
	(include/mailutils/iterator.h): Likewised.
	(include/mailutils/list.h): Likewised.
	(include/mailutils/mailer.h): Likewised.
	(include/mailutils/message.h): Likewised.
	(include/mailutils/mime.h): Likewised.
	(include/mailutils/observer.h): Likewised.
	(include/mailutils/property.h): Likewised.
	(include/mailutils/registrar.h): Likewised.
	(mailbox/include/address0.h): Likewised.
	(mailbox/include/auth0.h): Likewised.
	(mailbox/include/body0.h): Likewised.
	(mailbox/include/debug0.h): Likewised.
	(mailbox/include/header0.h): Likewised.
	(mailbox/include/iterator0.h): Likewised.
	(mailbox/include/list0.h): Likewised.
	(mailbox/include/mailer0.h): Likewised.
	(mailbox/include/message0.h): Likewised.
	(mailbox/include/mime0.h): Likewised.
	(mailbox/include/observer0.h): Likewised.
	Pointed by Sam Roberts.

2001-02-28  Alain Magloire

	* mailbox/address.c (address_get_personal): Remove surrounding quotes.
	* mailbox/mbx_mbox.c (mbox_scan): If the mailbox is updated don't
	rescan again.
	(mbox_expunge): Same the uidvalidity in the header field "IMABase:"
	on the first message of the mailbox.

	* imap4d/fetch.c (fetch_envelope): Envelope imap4 command implemented.
	(fetch_send_address): New function.

2001-02-26  Alain Magloire

	* mailbox/mbx_imap.c (imap_submessage_size): New function to
	retrieve message size of attachments.
	* imap4d/fetch.c: More functionnality for the FETCH command.
	(fetch_operation): New operation.
	* imap4d/util.c (util_token): little helper function.

2001-02-25  Alain Magloire

	* lib/strtok_r.c: If there are no delimiters left save the old string
	and return NULL.

	* mailbox/folder_imap.c (imap_fetch): Finish imap FETCH command.
	(imap_rfc822): New Function.
	(imap_rfc822_text): New Function.
	(imap_rfc822_size): New Function.
	(imap_rfc822_header): New Function.
	(imap_uid): New Function.
	(imap_body): New Function.
	(imap_bodystructure0): Save the size.

2001-02-22  Alain Magloire

	* mailbox/property.c: New file.
	* include/mailutils/property.h: New file.
	* mailbox/mailbox.c (mailbox_get_property): New function,
	a first draft to let set "property" on a mailbox that can
	change its behaviour.
	* mailbox/include/mailbox0.h: New field in struct _mailbox, property.

	* sieve/lex-sieve.lex: Add LGPL banner.
	* sieve/gram-sieve.y: Add LGPL banner.

2001-02-22  Alain Magloire

	* sieve: New Directory.
	* sieve/lex-sieve.lex: RFC3028 tokenizer.
	* sieve/gram-sieve.y: RFC3028 grammar.

2001-02-20  Alain Magloire

	* mailbox/mailbox.c (mailbox_set_ticket): Those objects are now part
	of the folder if a folder is attached to the mailbox.
	(mailbox_set_authority: Likewise.
	(mailbox_set_stream): Likewise.
	* mailbox/mbx_imap.c (imap_message_read): If offset == 0, reset
	the lines to 0.
	(imap_body_read): Likewise.

2001-02-19  Alain Magloire

	* mailbox/mbx_pop.c (pop_body_read): Move the CHECK_BUSY higher
	it should be the first thing done.  If the state is POP_NO_STATE
	reset the offset and the size to 0 i.e we are starting fresh.
	(pop_header_read): Likewise.
	(pop_message_read): Likewise.
	* mailbox/stream.c (stream_write): Don't call stream_flush().

2001-02-04  Alain Magloire

	* mailbox/message.c (message_get_uid): Add message_get_uid() for
	the UID of the message (IMAP definition) and message_get_uidl() for
	the POP3 definition.
	* mailbox/attachment.c: Indentation fixes.
	* mailbox/file_stream.c: Make sure that the FILE* is close before		opening.
	* mailbox/folder_imap.c: Use strcasecmp() not strcmp().
	* mailbox/mailbox.c: Added mailbox_uidnext() and mailbox_uidvalidity.
	* mailbox/mapfile_stream.c: When munmap() failed we should check
	against MAP_FAILED, not NULL.
	* mailbox/mbx_imap.c: Implement imap_uidnext(), imap_uidvalidity()
	imap_message_uid().
	* mailbox/mbx_mbox.c: Implement mbox_uidnext(), mbox_uidvalidity()
	mbox_message_uid().
	* mailbox/mbx_mboxscan.c: Implement uidvalidity, it is save int the
	header of the first message, "X-IMAPbase: 127673838 12", a la c-client.
	Save UID, it is save in "X-UID".
	* mailbox/mbx_pop.c: Implement pop_messages_recent(),
	pop_message_unseen() and pop_uid().
	* mailbox/trans_stream.c: Indentation fixes.

	* include/mailutils/message.h: New prototypes message_get_uid(),
	message_set_get_uid().
	* include/mailutils/mailbox.h: New prototypes mailbox_uidnext(),
	mailbox_uidvalidity().

	* lib/snprintf.c lib/snprintf.h: Put it under the LGPL term.

	* mailbox/imap4d/fetch.c: First draft implementation, very yucky.
	* mailbox/imap4d/select.c: First draft implementation.
	* mailbox/imap4d/util.c: Add util_msgset() and util_send().
	Reuse of util_getcommand() for subcommands.

	* mailbox/pop3d/uidl.c: API change the call is message_get_uidl()
	to have UIDL POP3.


2001-02-03  Alain Magloire

	* mailbox/mailbox.c mailbox/mbx_mbox.c mailbox/mbx_imap.c:
	Implement mailbox_messages_recent() and mailbox_message_unseen(), this
	time as define by the IMAP rfc.

2001-02-02  Alain Magloire

	* mailbox/header.c: ENOENT was not return if the header was
	not found.
	* mailbox/mbx_mbox.c: When expunging check to see if the registar
	the path_record too.

2001-02-02  Alain Magloire

	* pop3d/extra.c (pop3_readline): Since the length of the string
	is known, we can use memcpy() and friends for string manipulations.
	memXXX() functions are builtin in GNU C (gcc) and are much faster
	then the strXXX() counterparts. Small change in the loop to take
	advantage of this.

	* pop3d/quit.c: The rfc1939 insist that after a QUIT, we must
	release any resources and close the connection:
	"Whether the removal was successful or not, the server
        then releases any exclusive-access lock on the maildrop
        and closes the TCP connection."  This was not done if error
	occured while expunging, now we will close the connection and
	notify the client of the error(ERR_FILE).

2001-02-01  Alain Magloire

	"Premature Optimization Is The Root Of All Evil", Knuth.

	* mailbox/attachment.c: Typo should be "Content-Disposition"

	* mailbox/mbx_mbox.c mailbox/mbx_mboxscan.c mailbox/header.c:
	Attempt to optimze the header, header_get_fvalue() is created,
	The mailbox save/cache the most common headers, when doing a
	header_get_value(), header_get_fvalue() is call first hoping
	that the requested header was cache, if it fails we fall back
	to the usual parsing.  The common elected headers are : From,
	To, Cc, Subject, Date, Content-Type, X-UIDL, X-UID.

	* mailbox/mailbox.c mailbox/mbx_mbox.c mailbox/mbx_imap.c:
	I've confuse the semantic of "unseen" and "recent", "unseen"
	means new mail, not recent.  Renamed mailbox_recent_count()
	to mailbox_unseen_count().
	* include/mailutils/mailbox.h: updated for mailbox_unseen_count()


2001-01-25  Alain Magloire

	* frm/frm.c: Forget to add --summary option and fix return status.
	When being very quiet just freopen(/dev/null, w, stdout).

2001-01-25  Alain Magloire

	* pop3d/capa.c: Add UIDL in the capability list.
	and update Copyrigth.
	* pop3d/pop3d.c: Remove mbox_record register, only need path_record.
	* pop3d/retr.c: When retrieve a message should be mark as read.
	since we do not strip out the header "Status:".
	* pop3d/top.c: Adjust stream_readline().

2001-01-25  Alain Magloire

	While working on the new version of the API mailbox, Changelog was
	discontinued, since the API could literaly change overnight a
	maintenace of the entries were of a particular burden.
	The API of the library, and some utilities like pop3d are
	stable enough to restart normal entries.

	* mailbox/*: New Api to access mailbox.
	* include/mailutils: Public prototypes of the API.
	* frm/frm.c frm/Makefile.am: A clone of elm frm utility.
	* from/from.c from/Makefile.am: A utility to scan mailboxes.
	* pop3d/* : GNU pop3d server.

2000-05-19  Sean 'Shaleh' Perry <shaleh@debian.org>

	* libmailbox/mh.c: fleshed out mh_open() some more

2000-05-18  Sean 'Shaleh' Perry <shaleh@debian.org>

	* libmailbox/mh.c: fleshed out mh_open() some more

2000-05-15  Sean 'Shaleh' Perry <shaleh@debian.org>

	* libmailbox/*: ran some files thru emacs indent, I think I introduced
	some oddness with vi
	* libmailbox/mh.[ch]: new files, based on maildir
	the mh work is very empty -- just mh_open right now

2000-04-19  Jeff Bailey  <jbailey@nisa.net>

	* configure.in: Test for limits.h and inttypes.h, add malloc
	and realloc checks.
	* m4/: New directory
	* m4/Makefile.am: New file to support directory
	* m4/malloc.m4: File to support lib/ directory
	* m4/realloc.m4: File to support lib/ directory
	* lib/Makefile.am: Distribute xalloc.h
	* lib/xalloc.h: New file to support xmalloc.c
	* lib/xmalloc.c: New version from sh-utils-2.0g
	* autogen.sh: Look in m4 for extra macros
	* doc/Makefile.am: Rearrange to quiet automake

2000-03-28  Jakob 'sparky' Kaivo  <jkaivo@elijah.nodomainname.net>

	* pop3d/pop3d.c (main): handle SIGPIPE

2000-01-19  Sean 'Shaleh' Perry

	* mailbox/mbx_mh.c: some more code fleshing, still ugly
	* README README-alpha: updates, corrected README to list mailbox as LGPL

2000-01-19  Sean 'Shaleh' Perry

	* mailbox/mbx_mh.c: new file
	no header, no error checking, no hable englais
	* url/url_mh.[ch]: new files
	url support for MH mailboxes

2000-01-17  Sean 'Shaleh' Perry

	* examples/from.c: remove extraneous copyright notice

1999-12-15  Alain Magloire

	* url/url_mbox.h url/url_pop.h url/url_imap.h url/url_mailto.h
	New files.

1999-12-01  Alain Magloire

	* url/_cpystr.c url/chewurl.c url/url.c url/url_imap.c
	url/url_mailto.c url/url_mbox.c url/url_pop.c : New files,
	first attempt to define the URL API.

	* lib/Makefile.am: added xmalloc.c, xstrdup.c, xstrtol.{c,h}
	* lib/xmalloc.c lib/xstrdup.c lib/xstrtol.c lib/xstrtol.h : New files

1999-11-21  Jeff Bailey

	* doc/rfc*: Add.  Standards followed should be included here.

1999-11-23  Jakob 'sparky' Kaivo

	* TODO: Mention Maildir
	* libmailbox/mailbox.c (mbox_init): new function
	* libmailbox/maildir.h: new file
	* libmailbox/maildir.c: new file
	* libmailbox/mailbox.c (mbox_open): uncommented maildir_open attempt

1999-11-15  Jeff Bailey

	* lib/ansi2knr.c lib/ansi2knr.h: Add

	* configure.in: Add AM_C_PROTOTYPES

	* libmailbox/Makefile.am: Add ansi2knr handling

1999-11-08  Sean 'Shaleh' Perry

	* cleaned up some of the automake autoconf magic for non-Linux

1999-11-07  Sean 'Shaleh' Perry

	* TODO: restructuring, now split into sections
	* libmailbox/mailbox.c libmailbox/mailbox.h: added two new functions
	to the api and began implementing them in unixmbox
		is_updated() => has this mailbox been updated externally?
		scan() => build info on mailbox, removing old data as needed
		currently not implemented

1999-11-06  Sean 'Shaleh' Perry

	* libmailbox/mailbox.c: more work on expunge
	* libmailbox/mailbox.c: added a tester routine
	* Makefile.am: added -g

1999-11-06  Sean 'Shaleh' Perry

	* libmailbox/unixmbox.c: work on expunge
	use read/write along with lseek still blows up -- getting there
	* mail/mail.c: check return value of mbox_open()

1999-10-23  Alain Magloire

	* ChangeLog: Cleanup according to GNU std, and remove
	of email addresses. The emails should be AUTHORS or THANKS
	so if they change no need to sed everything.

1999-10-11  Jeff Bailey

	* libmailbox/Makefile.am: Remove no-install option, add -pedantic

1999-10-12  Sean 'Shaleh' Perry

	* made sure that the imap4 was REALLY broken

1999-10-11  Jeff Bailey

	* imap4d/Makefile.am: New file

	* configure.in: Create imap4d/Makefile, and no install option
	for library

	* pop3d/Makefile.am: Add warnings, remove unneeded variable

        * TODO: Update

	* impa4rev1/: Rename to imap4d. (I asked first, really I did...)

	* lib/Makefile.am: Update for new files

	* lib/getline.c: New File

	* lib/getline.h: New file

1999-10-11  Sean 'Shaleh' Perry

	* added my imap code -- PLEASE DO NOT TOUCH

1999-10-10  Jeff Bailey

	* THANKS: New file

	* doc/mailutils.texi: New File
	Provided by Alain Magloire <alainm@rcsm.ece.mcgill.ca> with some
	changes so that Makeinfo reports no errors.

	* doc/Makefile.am: New file

	* configure.in: Deal with libsrc to lib rename

	* pop3d/Makefile.am: Deal with libsrc to lib rename

	* Makefile.am: Deal with libsrc to lib rename.
	Add reference to doc/ subdirectory.

	* libsrc/: Rename to lib/

1999-10-09  Sean 'Shaleh' Perry

	* Made changelog.pl output in approved format -- I miss the time stamp

1999-10-09 Sean 'Shaleh' Perry

	* added examples/gnu-pop3d.pam

1999-10-08  Jeff Bailey

	* doc/: New directory

	* pop3d/Makefile.am: Remove pam detection, now handled by configure
	in the @AUTHLIBS@ spot.

	* configure.in: Detect pam correctly/handle crypt case correctly
	Add option: --disable-pam

	* acconfig.h: New File

1999-10-08 Sean 'Shaleh' Perry

	* added showmail.c to examples
	* libmailbox: some minor code cleanups

1999-10-08 Sean 'Shaleh' Perry

	* fixed the "if empty mailbox, return not implemented"
	NB: seems there was a large assumption being made:
	if unixmbox_open() failed, it was because it was not mbox
	this was wrong for many reasons, so on actual "not mbox",
	return EBADMSG.
	Prolly want to come up with a better error, but this works for now
	* more cleaning in the mailbox code
	a) added stat() call -- we can bomb earlier, plus detect if
	passed object is a directory or file
	b) unixmbox_close() free()'s mbox.  This will hamper the use
	when we add support for more mailboxes later.  Need to find
	a solution.  Perhaps a unixmbox_free() call.
	There was also a small leak there -- mbox->name was being left.
	c) To aid checking in unixbox_open(), added checks around fgets call.
	Now properly detects EOF, errors, etc.  This was a large cause of the
	spurious "not implemented" bug.
	d) all of unixmbox_open()'s function calls should now be checked
	NB: need to do the same for rest of file

1999-10-07 Sean 'Shaleh' Perry

	* removed spurious code in from.c
	* added TODO file

1999-10-07  Jeff Bailey

	* Makefile.am: Compile libsrc/ first.

	* pop3d/Makefile.am: Link properly with crypt and libmailutils.a
	from libsrc/

	* libsrc/Makefile.am: Produce one library for all functions.
	Do not use libtool for this library, it will never be shared.

	* configure.in: Remove AM_MAINTAINER_MODE.  Export crypt detection
	to Makefiles

1999-10-07 Sean 'Shaleh' Perry

	* included my read_a_line() in examples/

1999-10-06 Sean 'Shaleh' Perry

	* Cleanup some compilation issues
	* changed "w+" to "w" in called to pop3_mainloop():ofile = fdopen()
	why was it called with w+?  It is only ever used for writing.
	* catch EINTR in call to accept() (play nice w/ our UNIX friends)
	* set SO_REUSEADDR on daemon's socket

1999-10-05 Sean 'Shaleh' Perry

	* Added changelog.pl so we can have automated entries
	set CVS_EMAIL=me@here.com and CVS_FULLNAME="Joe Blow"
	usage: changelog.pl "added signal.c" or changelog.pl, an editor will
	then appear (uses $VISUAL and $EDITOR)
	the format is controlled simply via the format call at the end
	and the section of perl code directly above it

1999-10-05 Sean 'Shaleh' Perry

	* added pop3d/signal.c -- contains pop3_sigchld() currently

1999-10-05 Sean 'Shaleh' Perry

	* initial fork() rewrite, not even compiled it yet

1999-10-04 Sean 'Shaleh' Perry

	* changed lock(int mode) to lock(mailbox_lock_t mode), this will allow
	the type to be chnaged later without affecting code compatibility
	* added name to AUTHORS
	* noticed mention of IMAP4 server and went back to coding it (-:

1999-10-03  Jeff Bailey

	* mail/mail.c: Support --help, --version.

	* mail/Makefile.am: Add -Wall to compile line.

	* libmailbox/Makefile.am: Add -Wall to compile line.

	* libmailbox/mailbox.c: Warning cleanup, second parameter of lock
	should be unsigned int, not int.

	* libmailbox/mailbox.h: ""

	* libmailbox/unixmbox.h: ""

	* libmailbox/unixmbox.c: ""

	* AUTHORS: Include my name. =)

	* README: Rewrite for public consumption

	* README-alpha: New file, add mailing list address, CVS information.

	* libmailbox/unixmbox.c: Include config.h if defined

	* libmailbox/mailbox.c: Include config.h if defined

	* mail/mail.c: Include config.h if defined, update copyright.


1999-10-01 Sean 'Shaleh' Perry

	* added an examples directory and the first example, from.c

1999-10-01 Jakob 'sparky' Kaivo

	* libmailbox/*.[ch]: added cleanup patches from Shaleh while he works
	on getting CVS access

1999-09-22  Jakob 'sparky' Kaivo

	* mail/mail.c (main): added 'f' and 'F' to test mbox_header_line

	* pop3d/apop.c (pop3_apop): cleanup, partial rewrite for libmailbox

	* pop3d/retr.c (pop3_retr): fixed a potential segfault

	* pop3d/user.c (pop3_user): cleanup and use mbox_lock

	* libmailbox/mailbox.c (mbox_header_line): new function
	(mbox_body_lines): new function

	* mail/Makefile.am (mail_DEPENDENCIES): added libmailbox.la

	* pop3d/top.c (pop3_top): made it work with libmailbox

	* libmailbox/unixmbox.c (unixmbox_open): added check to see if it's
	actually an mbox file
	(unixmbox_open): Set mbox->_lock to unixmbox_lock
	(unixmbox_lock): new function

	* libmailbox/unixmbox.h: Added prototype for locking

	* libmailbox/mailbox.c: Add dummy initializer for locking

	* libmailbox/mailbox.h: Added interface for locking
	Added interfaces for mbox_header_line and mbox_body_lines

	* pop3d/*.[ch]: changed copyright info to FSF

	* libmailbox/*.[ch]: added copyright/licensing info

1999-09-21  Jakob 'sparky' Kaivo

	* pop3d/Makefile.am (pop3d_LDADD): add $(AUTHLIBS)

	* configure.in: Added libsrc/Makefile to AC_OUTPUT (duh, Jake!)
	fixed the PAM and crypt checks

	* README: actually put something here, noted necessary tools to build
	from CVS

1999-09-14  Jakob 'sparky' Kaivo

	* pop3d/pop3d.c (main): moved setgid() call to after option parsing
	(main): make --version report PACKAGE and VERSION

	* libmailbox/mailbox.c (mbox_open): changed paramater type to const

	* pop3d/Makefile.am (INCLUDES): change relative directories to
	top_srcdir base

	* configure.in: Added checks for PAM and crypt

1999-09-13  Jakob 'sparky' Kaivo

	* pop3d/retr.c (pop3_retr): fixed calls mbox_header => mbox_get_header
	and mbox_body => mbox_get_body

	* pop3d/user.c (pop3_user): removed references to mailbox variable

	* pop3d/stat.c (pop3_stat): fixed mbox->is_deleted => mbox_is_deleted

	* pop3d/pop3d.c (pop3_mainloop): removed reference to lockfile variable

	* pop3d/extra.c (pop3_abquit): change fclose(mbox) to mbox_close(mbox)
	removed calls to free(messages) and pop3_unlock()

	* pop3d/dele.c (pop3_dele): fixed call to mbox_delete()

	* Makefile.am (SUBDIRS): added pop3d and libsrc

	* configure.in: Added checks needed for pop3d/*
	made it work with libtool

	* libsrc/*: imported from gnu-pop3d tree

	* pop3d/*: imported from gnu-pop3d tree

1999-09-11  Jeff Bailey

	* libmailbox/unixmbox.h: Do not prefix config.h defines with _

1999-09-10  Jeff Bailey

	* */*: Accomidate directory rearrange