John McEleney / mailutils

* Makefile.am: Shut up cmp's stderr.
* libmailutils/body.c (_body_get_stream): Set full buffering
mode on the body stream.
* libmailutils/errors (MU_ERR_AUTH_NO_CRED): New error code.
* libproto/mailer/smtp.c (smtp_open): Do not treat
ENOSYS or MU_ERR_AUTH_NO_CRED (returned by mu_smtp_auth) as errors.
(smtp_send_message): Do not try to submit the message if it is
bigger than the maximum imposed by the server.
* libproto/mailer/smtp_auth.c (mu_smtp_auth): Return MU_ERR_AUTH_NO_CRED
if neither user name nor password are supplied.
* mail/send.c (mail_send0): Issue diagnostics if
sending attempt has failed.

Sergey Poznyakoff authored 2010-09-21 21:59:25 +0300

* include/mailutils/cpp/pop3.h (capa): Add reread parameter.
(getline): Add new prototype.
(send, readline): Remove.
(response, stat): Change prototype.
* libmu_cpp/pop3.cc: Likewise.
* include/mailutils/cpp/stream.h
(read, write, readline): Change prototype.
(sequential_readline, sequential_write): Remove.
* libmu_cpp/stream.cc: Likewise.

Wojciech Polak authored 2010-09-21 19:42:36 +0200

* libproto/mailer/smtp.c: Rewrite using new SMTP API.
* libproto/mailer/smtp_quit.c (mu_smtp_quit): Return immediately
if already in closed state.

* libmailutils/ticket.c (mu_ticket_get_cred): Return MU_ERR_FAILURE
if all methods fail.
* mail/send.c: Port 23321cf7 from patches-2.2
(msg_to_pipe): Return status code.
(save_dead_message, send_message): New functions, extracted from
mail_send0.
(mail_send0): Call save_dead_message if sending failed.

Sergey Poznyakoff authored 2010-09-21 00:36:10 +0300

* include/mailutils/smtp.h (mu_smtp_write): Mark as printf-like.
(mu_smtp_mail_basic, mu_smtp_rcpt_basic): Take variable number
of arguments.  Mark as printf-like.
(mu_smtp_data): New prototype.
* include/mailutils/sys/smtp.h (_MU_SMTP_SAVEBUF): New flag.
(_mu_smtp) <savebuf>: New member.
(_mu_smtp_data_begin, _mu_smtp_data_end): New protos.
* libproto/mailer/smtp_send.c: New file.
* libproto/mailer/smtp_data.c (_mu_smtp_data_begin)
(_mu_smtp_data_end, mu_smtp_data): New functions.

* libproto/mailer/Makefile.am (libmu_mailer_la_SOURCES): Add smtp_send.c.
* libproto/mailer/smtp_ehlo.c (mu_smtp_ehlo): Switch to MU_SMTP_EHLO
only if in MU_SMTP_MAIL state.
* libproto/mailer/smtp_mail.c (mu_smtp_mail_basic): Take variable number
of arguments.
* libproto/mailer/smtp_param.c (mu_smtp_get_param): Add missing typecast.
* libproto/mailer/smtp_rcpt.c (mu_smtp_rcpt_basic): Take variable number
of arguments.
* libproto/mailer/smtp_send.c (_smtp_data_send): Use _mu_smtp_data_begin and
_mu_smtp_data_end.
* testsuite/smtpsend.c: Emulate sending from a MU message.

Sergey Poznyakoff authored 2010-09-20 15:48:01 +0300

* include/mailutils/stream.h (mu_stream_printf): Mark as printf-like.
* include/mailutils/sys/stream.h (_MU_STR_EVENT_CLOSE): New event.
(_mu_stream) <event_cb_data>: New member.
* libmailutils/stream.c (mu_stream_seek): Avoid unnecessary seeks
in mu_buffer_none mode.  Complements 906499db.
(mu_stream_close): Mark _MU_STR_EVENT_CLOSE event.

Sergey Poznyakoff authored 2010-09-20 15:33:57 +0300

* libmailutils/message_stream.c (scan_stream): Change signature.  All
uses updated.
Correct the calculation of body_start.
(mu_message_stream_create): Return the stream.

Sergey Poznyakoff authored 2010-09-20 15:30:27 +0300

* include/mailutils/smtp.h (MU_SMTP_PARAM_URL): New parameter code.
* include/mailutils/sys/smtp.h (_MU_SMTP_CLNPASS): New flag.
(_mu_smtp) <secret>: New member.
* libproto/mailer/smtp_auth.c (get_ticket)
(_mu_smtp_fixup_params): New static functions.
(mu_smtp_auth): Call _mu_smtp_fixup_params to supply missing
pararameters.
* libproto/mailer/smtp_create.c (mu_smtp_destroy): Destroy secret.
Take care to erase eventual plaintext representation of the password.
* libproto/mailer/smtp_gsasl.c (_smtp_callback): Use mu_smtp_get_param
to obtain parameters.
* libproto/mailer/smtp_param.c (mu_smtp_set_param): Setting
MU_SMTP_PARAM_PASSWORD updates secret.  param[MU_SMTP_PARAM_PASSWORD]
points (temporarly and on request only) to plaintext password.
(mu_smtp_get_param): Likewise for retrieving password.
* testsuite/smtpsend.c (main): New parameter url=.

Sergey Poznyakoff authored 2010-09-19 23:56:35 +0300

* libmu_auth/gsasl.c (_gsasl_encoder,_gsasl_decoder): Do not free flt.
* include/mailutils/stream.h [__cplusplus]: Protect contents by extern "C".

Sergey Poznyakoff authored 2010-09-19 22:18:59 +0300

* Makefile.am: Avoid unnecessary rebuilds of git-describe and git-describe.h

Sergey Poznyakoff authored 2010-09-19 12:54:08 +0300

* libmailutils/stream.c (_mu_stream_create): Mask out internal
flags.
* pop3d/pop3d.c (main): Do not handle SIGPIPE, to avoid infinite
recursion.

Sergey Poznyakoff authored 2010-09-19 11:59:06 +0300

Sergey Poznyakoff authored 2010-09-19 10:49:16 +0300

* configure.ac (MU_COND_GSASL): New cond.
* include/mailutils/smtp.h (MU_SMTP_PARAM_DOMAIN)
(MU_SMTP_PARAM_USERNAME, MU_SMTP_PARAM_PASSWORD)
(MU_SMTP_PARAM_SERVICE, MU_SMTP_PARAM_REALM)
(MU_SMTP_PARAM_HOST, MU_SMTP_MAX_PARAM): New constants.
(mu_smtp_set_domain, mu_smtp_get_param): Remove.
(mu_smtp_set_param, mu_smtp_get_param): New prototypes.
(mu_smtp_auth, mu_smtp_add_auth_mech)
(mu_smtp_add_auth_mech_list, mu_smtp_mech_select): New prototypes.
* include/mailutils/sys/smtp.h (_mu_smtp) <domain>: Remove.
(_mu_smtp) <authimpl, param, authmech>: New members.
(_mu_smtp_gsasl_auth, _mu_smtp_mech_impl): New prototypes.

* libproto/mailer/Makefile.am [MU_COND_GSASL]: Define SMTP_GSASL.
(libmu_mailer_la_SOURCES): Add new sources.
* libproto/mailer/smtp_domain.c: Remove.
* libproto/mailer/smtp_param.c: New file.
* libproto/mailer/smtp_mech.c: New file.
* libproto/mailer/smtp_auth.c: New file.
* libproto/mailer/smtp_gsasl.c: New file.
* libproto/mailer/smtp_create.c (mu_smtp_destroy): Free new members of
struct _mu_smtp.
* libproto/mailer/smtp_ehlo.c (mu_smtp_ehlo): Use param[MU_SMTP_PARAM_DOMAIN]
instead of domain.
* testsuite/smtpsend.c: Handle SMTP AUTH.

* libmu_auth/gsasl.c (mu_gsasl_stream_create): Bugfix.

* libmailutils/xscript-stream.c (_xscript_ctl)
<MU_IOCTL_SWAP_STREAM>: If instream!=outstream, combine them first
into an iostream.

Sergey Poznyakoff authored 2010-09-18 19:55:31 +0300

* include/mailutils/smtp.h (mu_smtp_mail_basic)
(mu_smtp_rcpt_basic, mu_smtp_send_stream)
(mu_smtp_rset, mu_smtp_quit): New prototypes.
* include/mailutils/sys/smtp.h (MU_SMTP_RCPT)
(MU_SMTP_MORE, MU_SMTP_DOT, MU_SMTP_QUIT, MU_SMTP_CLOS): New states.
(_mu_smtp_xscript_level): New proto.
* libmailutils/errors (MU_ERR_REPLY): New error code.
* libproto/mailer/Makefile.am (libmu_mailer_la_SOURCES): Add new sources.
* libproto/mailer/smtp_data.c: New file.
* libproto/mailer/smtp_mail.c: New file.
* libproto/mailer/smtp_quit.c: New file.
* libproto/mailer/smtp_rcpt.c: New file.
* libproto/mailer/smtp_rset.c: New file.
* libproto/mailer/smtp_ehlo.c: Return MU_ERR_REPLY if the server replied
with a code other than 2xx.
* libproto/mailer/smtp_open.c: Likewise.
* testsuite/smtpsend.c: Implement full sending cycle (excepting
authorization).

Sergey Poznyakoff authored 2010-09-18 02:46:05 +0300

* sieve/tests/reject.at: Fix dependency on TZ.
* sieve/tests/relational.at: Ensure that fileintos go
to the test folder.
* sieve/tests/mul-addr.at: Remove unneeded require.

Sergey Poznyakoff authored 2010-09-18 00:28:16 +0300

* include/mailutils/smtp.h: New file.
* include/mailutils/Makefile.am (pkginclude_HEADERS): Add smtp.h.
* include/mailutils/list.h (mu_list_clear): New proto.
* include/mailutils/sys/smtp.h: New file.
* include/mailutils/sys/Makefile.am (sysinclude_HEADERS): Add smtp.h.
* libmailutils/errors (MU_ERR_BADREPLY, MU_ERR_SEQ): New error codes.
* libmailutils/list.c (mu_list_clear): New function.
* libproto/mailer/Makefile.am (libmu_mailer_la_SOURCES): Add new sources.
* libproto/mailer/smtp_capa.c: New file.
* libproto/mailer/smtp_carrier.c: New file.
* libproto/mailer/smtp_create.c: New file.
* libproto/mailer/smtp_disconnect.c: New file.
* libproto/mailer/smtp_domain.c: New file.
* libproto/mailer/smtp_ehlo.c: New file.
* libproto/mailer/smtp_io.c: New file.
* libproto/mailer/smtp_open.c: New file.
* libproto/mailer/smtp_starttls.c: New file.
* libproto/mailer/smtp_trace.c: New file.
* testsuite/smtpsend.c: New file.
* testsuite/Makefile.am (noinst_PROGRAMS): Add smtpsend.

Sergey Poznyakoff authored 2010-09-17 22:45:45 +0300

* bootstrap.conf: Build included listings in doc/texinfo.
* configure.ac: Require gettext 0.18
* doc/texinfo/Makefile.am: Remove the .c.inc rules.
* doc/texinfo/maint.mk: New file.
* lib/Makefile.am (libmuaux_la_SOURCES): Replace with libmuaux_a_SOURCES.

Sergey Poznyakoff authored 2010-09-17 19:05:06 +0300

Git does not keep empty subdirectories, so we need to recreate /cur and
/tmp subdirs in maildir mailboxes retrieved from the repo.

* bootstrap.conf: Recreate missing maildir parts.
* testsuite/testsuite.inc (MUT_MBCOPY): New macro.
* sieve/tests/ext.at: Use MUT_MBCOPY to copy mailboxes.
* sieve/tests/redirect.at: Likewise.
* sieve/tests/reject.at: Likewise.
* sieve/tests/testsuite.at: Likewise.
* testsuite/mbdel.at: Likewise.
* frm/tests/Makefile.am: Testsuite depends on
$(top_srcdir)/testsuite/testsuite.inc.
* libmailutils/tests/Makefile.am: Likewise.
* messages/tests/Makefile.am: Likewise.
* readmsg/tests/Makefile.am: Likewise.
* sieve/tests/Makefile.am: Likewise.
* testsuite/Makefile.am: Likewise.

Sergey Poznyakoff authored 2010-09-17 13:49:46 +0300

That's the first commit since the merge six days ago that passes
distcheck (with python, cxx, imap and nntp disabled, of course).

* testsuite/folder/DISTFILES: Restore. It is needed for some
of the remaining DejaGNU tests.
* testsuite/spool/DISTFILES: Likewise.
* testsuite/testsuite.at: New file.
* testsuite/atlocal.in: New file.
* libmailutils/tests/mbdel.at: Move to testsuite/.
* libmailutils/tests/mbdel.c: Likewise.
* libmailutils/tests/mime.at: Likewise.
* libmailutils/tests/mimetest.c: Likewise.

* Makefile.am (SUBDIRS): Place testsuite after libproto.
* configure.ac (AM_INIT_AUTOMAKE): Remove dist-lzma.
(AC_CONFIG_FILES): Add testsuite/atlocal.
* libmailutils/base64.c (_base64_decoder)
(_base64_encoder): Fix the use of uninitialized variables.
* libmailutils/tests/.gitignore: Remove mbdel and mimetest.
* libmailutils/tests/Makefile.am (noinst_PROGRAMS): Remove mbdel and mimetest.
(LDADD): Leave only MU_LIB_MAILUTILS.
(TESTSUITE_AT): Remove mbdel.at and mime.at
* libmailutils/tests/atlocal.in (PATH): Bugfix.
* libmailutils/tests/testsuite.at: Remove inclusion of mbdel.at and mime.at.
* po/POTFILES.in: Replace mailbox/ with libmailutils/.

* testsuite/.gitignore: Rewrite.
* testsuite/Makefile.am: Rewrite.
* testsuite/mbdel.at: Set +w on all copied mailboxes.
* testsuite/mimetest.c (main): Open mailbox for reading only.

* sieve/Makefile.am: Add examples/ to the distribution.

* libproto/mbox/mbox.c (mbox_open): Create locker only
if the mailbox is open for modification.
All users updated to check for mailbox->locker!=NULL before
using it.

Sergey Poznyakoff authored 2010-09-17 00:48:07 +0300

* libmailutils/tests/mbdel.at: New testcase.
* libmailutils/tests/Makefile.am (TESTSUITE_AT): Add mbdel.at.
* libmailutils/tests/testsuite.at: Include mbdel.at.
* libproto/mbox/mbox.c (mbox_remove): Fix return code.

* testsuite/maildir/mbox1: New test mailbox.
* testsuite/mh/mbox1: New test mailbox.
* testsuite/etc/DISTFILES: Remove.
* testsuite/folder/DISTFILES: Remove.
* testsuite/lib/DISTFILES: Remove.
* testsuite/Makefile.am: Use EXTRA_DIST to distribute
subdirs.

Sergey Poznyakoff authored 2010-09-16 12:53:52 +0300

* libmailutils/mailbox.c (mu_mailbox_open): Return MU_ERR_OPEN
if the mailbox has already been opened.

Sergey Poznyakoff authored 2010-09-16 02:10:13 +0300

* include/mailutils/mailbox.h (mu_mailbox_remove): New function.
* include/mailutils/stream.h: Add some comments.
* include/mailutils/sys/amd.h (_amd_data)<remove>: New method.
(amd_remove_dir): New function.
* include/mailutils/sys/mailbox.h (_mu_mailbox)<_remove>: New
method.
* libmailutils/amd.c (amd_remove_mbox): New function.
(amd_init_mailbox): Initialize the _remove method.
(amd_remove_dir): New function.
* libmailutils/errors (MU_ERR_MBX_REMOVED)
(MU_ERR_NOT_OPEN, MU_ERR_OPEN): New error codes.
* libmailutils/mailbox.c: Keep state of the mailbox (open vs. not
open, removed). Check it before doing anything on it.
(_MU_MAILBOX_OPEN, _MU_MAILBOX_REMOVED, _MU_MAILBOX_MASK): New
defines.
(mu_mailbox_open): Set _MU_MAILBOX_OPEN if the operation succeeds.
(mu_mailbox_close): Clear _MU_MAILBOX_OPEN if the operation succeeds.
Refuse to run if the mailbox was not opened.
(mu_mailbox_remove): New function.
(all functions): return MU_ERR_MBX_NULL if the mbox argument is
NULL.
Check mailbox state on entry and proceed accordingly.
* libproto/maildir/mbox.c: Implement _remove method.
(maildir_remove): New function.
(_mailbox_maildir_init): Initialize amd->_remove.
* libproto/mbox/mbox.c: Implement _remove method.
(mbox_remove): New function.
(_mailbox_mbox_init): Initialize amd->_remove.
* libproto/mh/mbox.c: Implement _remove method.
(mh_remove): New function.
(_mailbox_mh_init): Initialize amd->_remove.

* libmailutils/tests/mbdel.c: New file.
* libmailutils/tests/.gitignore: Add mbdel.
* libmailutils/tests/Makefile.am (noinst_PROGRAMS): Likewise.
(LDADD): List all mailbox formats.

* imap4d/delete.c (imap4d_delete): Use mu_mailbox_remove to
delete the folder.  Fall back to remove() if it does not appear
to be a mailbox.

Sergey Poznyakoff authored 2010-09-16 01:53:04 +0300

* examples/listop.c: Move to libmailutils/tests.
* examples/Makefile.am (noinst_PROGRAMS): Remove listop.
* libmailutils/tests/Makefile.am (noinst_PROGRAMS): Add listop.
(TESTSUITE_AT): Add list.at.
* libmailutils/tests/.gitignore: New file.
* libmailutils/tests/list.at: New file.
* libmailutils/tests/testsuite.at: Include list.at.

* libmailutils/list.c (list_itrctl): Fix mu_itrctl_replace.

Sergey Poznyakoff authored 2010-09-15 16:52:54 +0300

* libmailutils/tests/testsuite.at (MU_TEST_GROUP)
(MU_TEST_KEYWORDS, MU_TEST_COMMAND): New defines.
(mu_trimstr, mu_firstline): New macros.
(MU_GENERIC_TEST): New macro.
* libmailutils/tests/addr.c: Accept addresses from stdin.
* libmailutils/tests/address.at (TESTADDR): If the address
contains single quotes, pass it to the program via stdin.
Uncomment all such tests.
* libmailutils/tests/argcv.at (TESTARGS): Rewrite as a wrapper
over MU_GENERIC_TEST.
* libmailutils/tests/decode2047.at (TESTDEC2047): Likewise.
* libmailutils/tests/mailcap.at (MAILCAP): Likewise.
* libmailutils/tests/url.at (TESTURL): Likewise.
* libmailutils/tests/mailcap.c: Accept data from stdin.

Sergey Poznyakoff authored 2010-09-15 16:52:47 +0300

* libmailutils/Makefile.am (SUBDIRS): Make sure tests are descended
into only when the libmailutils library is already built.

Sergey Poznyakoff authored 2010-09-15 01:42:10 +0300

* configure.ac: Remove messages/testsuite
* messages/Makefile.am (SUBDIRS): Replace testsuite with tests.
* messages/tests/.gitignore: New file.
* messages/tests/Makefile.am: New file.
* messages/tests/atlocal.in: New file.
* messages/tests/testsuite.at: New file.
* messages/testsuite: Remove.

Sergey Poznyakoff authored 2010-09-15 01:08:00 +0300

* configure.ac: Create libmailutils/tests/atlocal and
libmailutils/tests/Makefile. Remove libmailutils/testsuite.
* examples/Makefile.am (noinst_PROGRAMS): Remove programs moved
to libmailutils/tests.
* examples/argcv.c -> libmailutils/tests/argcv.c
* libmailutils/testsuite/Decode -> libmailutils/tests/Decode
* libmailutils/testsuite/Encode -> libmailutils/tests/Encode
* examples/decode2047.c: Move to libmailutils/tests
* examples/encode2047.c: Move to libmailutils/tests
* examples/mailcap.c: Likewise.
* examples/url-parse.c: Likewise.

* include/mailutils/Makefile.am: Minor changes.
* libmailutils/Makefile.am (SUBDIRS): Replace testsuite with tests.
* libmailutils/tests/Makefile.am: New file.
* libmailutils/tests/addr.c: New file.
* libmailutils/tests/address.at: New file.
* libmailutils/tests/argcv.at: New file.
* libmailutils/tests/atlocal.in: New file.
* libmailutils/tests/base64d.at: New file.
* libmailutils/tests/base64e.at: New file.
* libmailutils/tests/decode2047.at: New file.
* libmailutils/tests/encode2047.at: New file.
* libmailutils/tests/fltst.c: New file.
* libmailutils/tests/mailcap.at: New file.
* libmailutils/tests/mime.at: New file.
* libmailutils/tests/testsuite.at: New file.
* libmailutils/tests/url.at: New file.

* libmailutils/testsuite/: Delete.

* frm/tests/Makefile.am: Prefix package.m4 creation commands with $(AM_V_GEN).
* readmsg/tests/Makefile.am: Likewise.
* sieve/tests/Makefile.am: Likewise.
* frm/tests/testsuite.at: Minor changes.
* readmsg/tests/testsuite.at: Include testsuite.inc.
* sieve/tests/testsuite.at: Likewise.
* sieve/tests/version.at: Comment out inclusion of testsuite.inc.
* testsuite/testsuite.inc: Add m4_version_prereq.

Sergey Poznyakoff authored 2010-09-15 00:48:22 +0300

This change has been waiting since 2005-08-16 (aaab8814),
when libmailbox had been renamed to libmailutils.  Back then MU
was still under CVS, which didn't like renames.

Sergey Poznyakoff authored 2010-09-14 15:01:52 +0300

* configure.ac: Add readmsg/tests/
* readmsg/Makefile.am: New file.
* readmsg/tests/.gitignore: New file.
* readmsg/tests/Makefile.am: New file.
* readmsg/tests/all.at: New file.
* readmsg/tests/atlocal.in: New file.
* readmsg/tests/hdr.at: New file.
* readmsg/tests/nohdr.at: New file.
* readmsg/tests/testsuite.at: New file.
* readmsg/tests/twomsg.at: New file.
* readmsg/tests/weed.at: New file.
* readmsg/testsuite: Remove.
* testsuite/testsuite.inc (AT_SKIP_TEST): New macro.

* testsuite/spool/mbox1: Remove trailing whitespace after Received headers.
* imap4d/testsuite/imap4d/fetch.exp: Reflece changes in mbox1.
* mail/testsuite/mail/read.exp: Likewise.
* mail/testsuite/mail/write.exp: Likewise.
* mailbox/testsuite/Mime: Likewise.

Sergey Poznyakoff authored 2010-09-14 12:26:12 +0300

* configure.ac: Build frm/testsuite/Makefile.am and atlocal.
Remove frm/testsuite/Makefile.
* testsuite/testsuite.inc: New file.

* frm/testsuite: Remove DejaGNU-based testsuite.
* frm/tests: Autotest-based testsuite.
* frm/tests/.gitignore
* frm/tests/Makefile.am
* frm/tests/atlocal.in
* frm/tests/testsuite.at

* frm/Makefile.am (SUBDIRS): Replace testsuite with tests.

* sieve/tests/Makefile.am (TESTSUITE): Add an include option.
* sieve/tests/version.at: Use macro from testsuite.inc.

Sergey Poznyakoff authored 2010-09-14 11:11:24 +0300

* sieve/examples/INBOX.orig
* sieve/examples/Test
* sieve/examples/test.out

Sergey Poznyakoff authored 2010-09-14 02:39:47 +0300

* mailbox/cfg_parser.y (mu_cfg_create_subtree): Optional prefix
character may be used to alter the separator or to suppress
value splitting.

Sergey Poznyakoff authored 2010-09-14 02:33:49 +0300

* include/mailutils/sys/stream.h (_MU_STR_EVENT_SET): Rename
to _MU_STR_EVENT_SET.
(_MU_STR_EVENT_CLR): Rename to _MU_STR_EVENT_CLRFLAG.
(_MU_STR_EVENT_FILLBUF, _MU_STR_EVENT_FLUSHBUF): New event codes.
(_MU_STR_EVMASK): New macro.
(_mu_stream) <cur>: Replace with pos, indicating current position
in the buffer.
(event_cb): Change signature.
(mu_stream_read_unbuffered): Remove.
(mu_stream_write_unbuffered): Remove.

* mailbox/iostream.c (mu_iostream_create): Provide the readdelim method
only if the underlying input transpor stream provides it.
* mailbox/streamref.c (mu_streamref_create_abridged): Likewise.

* mailbox/stream.c (_stream_event): New macro.
(mu_stream_read_unbuffered): Rename to static _stream_read_unbuffered.
(mu_stream_write_unbuffered): Rename to static _stream_write_unbuffered.
(_stream_advance_buffer, _stream_buffer_offset)
(_stream_orig_level): Remove macros.
(_stream_buffer_freespace): Rewrite.
(_stream_curp): New macro.
(_stream_fill_buffer): Make sure the `offset' indicates the offset
int the transport, corresponding to the beginning of the current
buffer.
(_stream_flush_buffer): Essentially rewritten.
(mu_stream_seek): Reflect changes to the _mu_stream structure. Optimize
calls to the seek method.
(_stream_skip_input_bytes): Likewise.
(mu_stream_read, _stream_scandelim, mu_stream_write): Rewrite using
new _mu_stream structure.

* mailbox/xscript-stream.c: Rewrite using stream events.

* mailbox/base64.c (_base64_encoder): Bugfix.

* libproto/pop/pop3_stream.c (_pop3_event_cb): Update signature to
match the changes above.
* examples/mimetest.c (main): Add more error checking.
* mail/testsuite/mail/write.exp: Minor fix.

Sergey Poznyakoff authored 2010-09-13 21:16:34 +0300

* imap4d/quota.c: New file.
* imap4d/Makefile.am (imap4d_SOURCES): Add quota.c
* imap4d/append.c (imap4d_append0): Refuse to append if
the quota is exceeded or would be exceeded after completing
the operation.
* imap4d/copy.c (imap4d_copy0): Refuse to copy messages if
the quota is exceeded or would be exceeded after completing
the operation.
Return a meaningful textual description.
Attempt to restore mailbox to its original size if the operation failed.
* imap4d/imap4d.c (imap4d_session_setup0): Call quota_setup.
* imap4d/imap4d.h (quota_setup, quota_check, quota_update): New functions.

* include/mailutils/folder.h (mu_list_response) <format>: New member.
* include/mailutils/mailbox.h (mu_mailbox_create_from_record): New
function.
* include/mailutils/types.hin (MU_FOLDER_ATTRIBUTE_LINK): New flag.
* libproto/mbox/folder.c (list_helper): Do not return symbolic links
unless MU_FOLDER_ATTRIBUTE_LINK is set.
Fill in the resp->format member.
* mailbox/mailbox.c (_mailbox_create_from_record): New static function.
(_create_mailbox0): Rewrite as a wrapper over _mailbox_create_from_record.
(mu_mailbox_create_from_record): New function.

Sergey Poznyakoff authored 2010-09-12 18:44:59 +0300

* movemail/movemail.c (guess_mbox_owner): Fix setting GID
with --owner=set-id.
(main): Don't attempt to expunge source mailbox if preserve_mail
is set.

Sergey Poznyakoff authored 2010-09-12 18:42:49 +0300

* mailbox/amd.c (read_size_file): Fix return value.

Sergey Poznyakoff authored 2010-09-12 18:42:02 +0300

* libproto/pop/pop3_stream.c (_pop3_event_cb)
(mu_pop3_filter_create): Fix buffer size manipulation.
* libmu_auth/tls.c: Protect gnutls debugging code with
DEBUG_TLS.

Sergey Poznyakoff authored 2010-09-12 00:35:17 +0300

As a side note, previous versions of pop3d did not do
byte-stuffing when sending RETR output.  This commit fixes
it.

* include/mailutils/filter.h (mu_dot_filter): New filter.
* mailbox/dot.c: New file.
* mailbox/Makefile.am (libmailutils_la_SOURCES): Add dot.c
* mailbox/crlfdot.c (_crlfdot_encoder): Bugfix. Do not
dereference iobuf until we know it is not NULL.
* mailbox/filter.c (mu_filter_get_list): Register mu_dot_filter.
* mailbox/fltstream.c (filter_wr_close, filter_rd_close): New
close methods, depending on the filter stream mode.
(mu_filter_stream_create): Set filter_rd_close for MU_STREAM_READ
and filter_wr_close for MU_STREAM_WRITE streams.
* mailbox/stream.c (mu_stream_readdelim): Update stream offset
when using stream->readdelim.

* pop3d/pop3d.h (pop3d_send_payload): New proto.
* pop3d/retr.c (pop3d_send_payload): Change function to be
optionally used in pop3d_top.  Use DOT filter on output.
* pop3d/top.c (pop3d_top): Rewrite using pop3d_send_payload.

* libproto/pop/pop3_retr.c (mu_pop3_retr): Default return
code is EINPROGRESS.
* libproto/pop/pop3_stream.c: Remove the filter stuff.
Use CRLFDOT instead.

* mailbox/amd.c (amd_body_stream_readdelim): Bugfix.  Increase
offset by nread bytes.

Sergey Poznyakoff authored 2010-09-11 20:56:52 +0300

* include/mailutils/filter.h (mu_filter_command) <mu_filter_flush> New command.
(mu_filter_result) <mu_filter_again>: New result code.
(MU_FILTER_MAX_AGAIN): New constant.
(mu_crlfdot_filter): New filter.
* include/mailutils/sys/stream.h (_MU_STR_DIRTY, _MU_STR_WRT)
(_MU_STR_ERR, _MU_STR_EOF, _MU_STR_INTERN_MASK): Avoid conflicts with
MU_STREAM_ constants from mailutils/stream.h

* mailbox/crlfdot.c: New source.
* mailbox/Makefile.am (libmailutils_la_SOURCES): Add crlfdot.c.
* mailbox/filter.c (mu_filter_get_list): Register mu_crlfdot_filter.
* mailbox/fltstream.c (init_iobuf): Fix initialization of isize and
input.
(filter_read): Redo the loop, allowing xcode to request a new
iteration by returning mu_filter_again.
(filter_write_internal): Likewise.
(filter_wr_flush): Call filter_write_internal with mu_filter_flush, reserving
mu_filter_lastbuf for really last buffers.
(filter_close): Call filter_write_internal with mu_filter_lastbuf.
* mailbox/stream.c (mu_stream_skip_input_bytes): Clear MU_STREAM_SEEK bit
before actually doing anything.

* include/mailutils/sys/pop3.h [DMALLOC]: Remove unneeded cond.

Sergey Poznyakoff authored 2010-09-11 16:12:22 +0300

Sergey Poznyakoff authored 2010-09-10 00:11:59 +0300

New ioctls MU_IOCTL_GET_TRANSPORT_BUFFER and
MU_IOCTL_SET_TRANSPORT_BUFFER return and modify bufferization
mode in the lowest level transport stream.  Both server and
client programs use this to switch to full buffering before
sending large amounts of data. This has a particular impact
on the output speed and CPU usage when TLS is in use.

* include/mailutils/stream.h (MU_IOCTL_GET_TRANSPORT_BUFFER)
(MU_IOCTL_SET_TRANSPORT_BUFFER): New ioctls.
(MU_TRANSPORT_INPUT, MU_TRANSPORT_OUTPUT): New constants.
(MU_TRANSPORT_VALID_TYPE): New macro.
(mu_buffer_query): New struct.
(mu_stream_get_buffer): New proto.

* libmu_auth/tls.c (_tls_io_ioctl): Return ENOSYS
if op is not supported.
(_tls_ioctl): Support MU_IOCTL_[GS]ET_TRANSPORT_BUFFER.
* mailbox/file_stream.c (fd_ioctl): Support MU_IOCTL_[GS]ET_TRANSPORT_BUFFER.
Return ENOSYS if op is not supported.
* mailbox/filter_iconv.c (_icvt_ioctl): Likewise.
* mailbox/iostream.c (_iostream_ctl): Likewise.
* mailbox/mapfile_stream.c (_mapfile_ioctl): Likewise.
* mailbox/memory_stream.c (_memory_ioctl): Likewise.
* mailbox/rdcache_stream.c (rdcache_ioctl): Likewise.
* mailbox/xscript-stream.c (_xscript_ctl): Likewise.
* mailbox/prog_stream.c (_prog_ioctl): Return ENOSYS if op is not
supported.
* mailbox/tcp.c (_tcp_ioctl): Likewise.

* mailbox/stream.c (mu_stream_default_buffer_size): New global.
(mu_stream_seek): Do not call seek method if the requested offset
is the same as the current one.
(mu_stream_set_buffer): Size==0 means use the default value.
(mu_stream_get_buffer): New function.
(mu_stream_truncate): Flush the buffer before truncating.

* mailbox/mime.c (mime_reset_state): New function.
(_mime_body_stream_seek): Rewrite using mime_reset_state.
(_mime_body_stream_ioctl): Return ENOSYS if op is not
supported.
(create_mime_body_stream): Reset mime state (_mime_body_stream_seek
may not be called due to the optimization in mu_stream_seek.

* mailbox/header.c (header_parse): Exit correctly if the buffer is
not terminated with a \n.

* libproto/mbox/mbox.c (mbox_open): Enforce full buffering on the
mailbox stream.
* libproto/pop/mbox.c (pop_header_fill): Minor fix.
* libproto/pop/pop3_stream.c (_POP3F_DONE)
(_POP3F_CHBUF): New constants.
(mu_pop3_stream)<done>: Remove. Replaced with flags.
<oldbuf>: New member.
(_pop3_event_cb): If _POP3F_CHBUF flag is set, restore
the initial buffering mode on the transport stream.
(mu_pop3_filter_create): Save away current buffering mode
and enforce full buffering while transferring bulk data.

* mail/from.c (hdr_from): Check return value from mu_message_get_header.
* mail/mail.c (main): Allow for MAILRC having empty value.
Always close the mailbox before exiting.

* pop3d/pop3d.c (pop3d_cfg_param): New statement output-buffer-size.
* pop3d/pop3d.h (pop3d_output_bufsize): New global.
* pop3d/retr.c (pop3d_send_payload): New function.
(pop3d_retr): Rewrite using pop3d_send_payload. Save away
current buffering mode and enforce full buffering while
transferring bulk data.
* pop3d/top.c (pop3d_top_: Likewise.

Sergey Poznyakoff authored 2010-09-09 23:18:40 +0300