John McEleney / mailutils

It is needed for the remaining DejaGNU tests and will go away later,
when they are rewritten.

Sergey Poznyakoff authored 2010-09-25 12:38:09 +0300

* mailbox/url.c (url_parse0): Take three arguments.  Return in the
third one a boolean indicating whether to expand %XX notations in
the URL.  Do not decode absolute file names and pipes.
(mu_url_parse): Use this value to decide.
* movemail/movemail.c (main): In emacs mode: force UNIX mbox
format as a default.  Send debugging output to stderr.
* libmailutils/tests/url.at: Add new tests.

Sergey Poznyakoff authored 2010-09-25 12:09:17 +0300

* am/debug.m4 (MU_DEBUG_MODE): Rewrite. Use -Wdeclaration-after-statement
if supported.
* comsat/oldcfg.c: Remove.
* comsat/Makefile.am (comsatd_SOURCES): Remove oldcfg.c.
* comsat/comsat.c: Remove the obsolete --config and --convert-config options.
* comsat/comsat.h (convert_config): Remove.

Sergey Poznyakoff authored 2010-09-25 12:08:37 +0300

* Makefile.am: Shut up cmp's stderr.
* libmailutils/body.c (_body_get_stream): Set full buffering
mode on the body stream.
* libmailutils/errors (MU_ERR_AUTH_NO_CRED): New error code.
* libproto/mailer/smtp.c (smtp_open): Do not treat
ENOSYS or MU_ERR_AUTH_NO_CRED (returned by mu_smtp_auth) as errors.
(smtp_send_message): Do not try to submit the message if it is
bigger than the maximum imposed by the server.
* libproto/mailer/smtp_auth.c (mu_smtp_auth): Return MU_ERR_AUTH_NO_CRED
if neither user name nor password are supplied.
* mail/send.c (mail_send0): Issue diagnostics if
sending attempt has failed.

Sergey Poznyakoff authored 2010-09-21 21:59:25 +0300

* include/mailutils/cpp/pop3.h (capa): Add reread parameter.
(getline): Add new prototype.
(send, readline): Remove.
(response, stat): Change prototype.
* libmu_cpp/pop3.cc: Likewise.
* include/mailutils/cpp/stream.h
(read, write, readline): Change prototype.
(sequential_readline, sequential_write): Remove.
* libmu_cpp/stream.cc: Likewise.

Wojciech Polak authored 2010-09-21 19:42:36 +0200

* libproto/mailer/smtp.c: Rewrite using new SMTP API.
* libproto/mailer/smtp_quit.c (mu_smtp_quit): Return immediately
if already in closed state.

* libmailutils/ticket.c (mu_ticket_get_cred): Return MU_ERR_FAILURE
if all methods fail.
* mail/send.c: Port 23321cf7 from patches-2.2
(msg_to_pipe): Return status code.
(save_dead_message, send_message): New functions, extracted from
mail_send0.
(mail_send0): Call save_dead_message if sending failed.

Sergey Poznyakoff authored 2010-09-21 00:36:10 +0300

* include/mailutils/smtp.h (mu_smtp_write): Mark as printf-like.
(mu_smtp_mail_basic, mu_smtp_rcpt_basic): Take variable number
of arguments.  Mark as printf-like.
(mu_smtp_data): New prototype.
* include/mailutils/sys/smtp.h (_MU_SMTP_SAVEBUF): New flag.
(_mu_smtp) <savebuf>: New member.
(_mu_smtp_data_begin, _mu_smtp_data_end): New protos.
* libproto/mailer/smtp_send.c: New file.
* libproto/mailer/smtp_data.c (_mu_smtp_data_begin)
(_mu_smtp_data_end, mu_smtp_data): New functions.

* libproto/mailer/Makefile.am (libmu_mailer_la_SOURCES): Add smtp_send.c.
* libproto/mailer/smtp_ehlo.c (mu_smtp_ehlo): Switch to MU_SMTP_EHLO
only if in MU_SMTP_MAIL state.
* libproto/mailer/smtp_mail.c (mu_smtp_mail_basic): Take variable number
of arguments.
* libproto/mailer/smtp_param.c (mu_smtp_get_param): Add missing typecast.
* libproto/mailer/smtp_rcpt.c (mu_smtp_rcpt_basic): Take variable number
of arguments.
* libproto/mailer/smtp_send.c (_smtp_data_send): Use _mu_smtp_data_begin and
_mu_smtp_data_end.
* testsuite/smtpsend.c: Emulate sending from a MU message.

Sergey Poznyakoff authored 2010-09-20 15:48:01 +0300

* include/mailutils/stream.h (mu_stream_printf): Mark as printf-like.
* include/mailutils/sys/stream.h (_MU_STR_EVENT_CLOSE): New event.
(_mu_stream) <event_cb_data>: New member.
* libmailutils/stream.c (mu_stream_seek): Avoid unnecessary seeks
in mu_buffer_none mode.  Complements 906499db.
(mu_stream_close): Mark _MU_STR_EVENT_CLOSE event.

Sergey Poznyakoff authored 2010-09-20 15:33:57 +0300

* libmailutils/message_stream.c (scan_stream): Change signature.  All
uses updated.
Correct the calculation of body_start.
(mu_message_stream_create): Return the stream.

Sergey Poznyakoff authored 2010-09-20 15:30:27 +0300

* include/mailutils/smtp.h (MU_SMTP_PARAM_URL): New parameter code.
* include/mailutils/sys/smtp.h (_MU_SMTP_CLNPASS): New flag.
(_mu_smtp) <secret>: New member.
* libproto/mailer/smtp_auth.c (get_ticket)
(_mu_smtp_fixup_params): New static functions.
(mu_smtp_auth): Call _mu_smtp_fixup_params to supply missing
pararameters.
* libproto/mailer/smtp_create.c (mu_smtp_destroy): Destroy secret.
Take care to erase eventual plaintext representation of the password.
* libproto/mailer/smtp_gsasl.c (_smtp_callback): Use mu_smtp_get_param
to obtain parameters.
* libproto/mailer/smtp_param.c (mu_smtp_set_param): Setting
MU_SMTP_PARAM_PASSWORD updates secret.  param[MU_SMTP_PARAM_PASSWORD]
points (temporarly and on request only) to plaintext password.
(mu_smtp_get_param): Likewise for retrieving password.
* testsuite/smtpsend.c (main): New parameter url=.

Sergey Poznyakoff authored 2010-09-19 23:56:35 +0300

* libmu_auth/gsasl.c (_gsasl_encoder,_gsasl_decoder): Do not free flt.
* include/mailutils/stream.h [__cplusplus]: Protect contents by extern "C".

Sergey Poznyakoff authored 2010-09-19 22:18:59 +0300

* Makefile.am: Avoid unnecessary rebuilds of git-describe and git-describe.h

Sergey Poznyakoff authored 2010-09-19 12:54:08 +0300

* libmailutils/stream.c (_mu_stream_create): Mask out internal
flags.
* pop3d/pop3d.c (main): Do not handle SIGPIPE, to avoid infinite
recursion.

Sergey Poznyakoff authored 2010-09-19 11:59:06 +0300

Sergey Poznyakoff authored 2010-09-19 10:49:16 +0300

* configure.ac (MU_COND_GSASL): New cond.
* include/mailutils/smtp.h (MU_SMTP_PARAM_DOMAIN)
(MU_SMTP_PARAM_USERNAME, MU_SMTP_PARAM_PASSWORD)
(MU_SMTP_PARAM_SERVICE, MU_SMTP_PARAM_REALM)
(MU_SMTP_PARAM_HOST, MU_SMTP_MAX_PARAM): New constants.
(mu_smtp_set_domain, mu_smtp_get_param): Remove.
(mu_smtp_set_param, mu_smtp_get_param): New prototypes.
(mu_smtp_auth, mu_smtp_add_auth_mech)
(mu_smtp_add_auth_mech_list, mu_smtp_mech_select): New prototypes.
* include/mailutils/sys/smtp.h (_mu_smtp) <domain>: Remove.
(_mu_smtp) <authimpl, param, authmech>: New members.
(_mu_smtp_gsasl_auth, _mu_smtp_mech_impl): New prototypes.

* libproto/mailer/Makefile.am [MU_COND_GSASL]: Define SMTP_GSASL.
(libmu_mailer_la_SOURCES): Add new sources.
* libproto/mailer/smtp_domain.c: Remove.
* libproto/mailer/smtp_param.c: New file.
* libproto/mailer/smtp_mech.c: New file.
* libproto/mailer/smtp_auth.c: New file.
* libproto/mailer/smtp_gsasl.c: New file.
* libproto/mailer/smtp_create.c (mu_smtp_destroy): Free new members of
struct _mu_smtp.
* libproto/mailer/smtp_ehlo.c (mu_smtp_ehlo): Use param[MU_SMTP_PARAM_DOMAIN]
instead of domain.
* testsuite/smtpsend.c: Handle SMTP AUTH.

* libmu_auth/gsasl.c (mu_gsasl_stream_create): Bugfix.

* libmailutils/xscript-stream.c (_xscript_ctl)
<MU_IOCTL_SWAP_STREAM>: If instream!=outstream, combine them first
into an iostream.

Sergey Poznyakoff authored 2010-09-18 19:55:31 +0300

* include/mailutils/smtp.h (mu_smtp_mail_basic)
(mu_smtp_rcpt_basic, mu_smtp_send_stream)
(mu_smtp_rset, mu_smtp_quit): New prototypes.
* include/mailutils/sys/smtp.h (MU_SMTP_RCPT)
(MU_SMTP_MORE, MU_SMTP_DOT, MU_SMTP_QUIT, MU_SMTP_CLOS): New states.
(_mu_smtp_xscript_level): New proto.
* libmailutils/errors (MU_ERR_REPLY): New error code.
* libproto/mailer/Makefile.am (libmu_mailer_la_SOURCES): Add new sources.
* libproto/mailer/smtp_data.c: New file.
* libproto/mailer/smtp_mail.c: New file.
* libproto/mailer/smtp_quit.c: New file.
* libproto/mailer/smtp_rcpt.c: New file.
* libproto/mailer/smtp_rset.c: New file.
* libproto/mailer/smtp_ehlo.c: Return MU_ERR_REPLY if the server replied
with a code other than 2xx.
* libproto/mailer/smtp_open.c: Likewise.
* testsuite/smtpsend.c: Implement full sending cycle (excepting
authorization).

Sergey Poznyakoff authored 2010-09-18 02:46:05 +0300

* sieve/tests/reject.at: Fix dependency on TZ.
* sieve/tests/relational.at: Ensure that fileintos go
to the test folder.
* sieve/tests/mul-addr.at: Remove unneeded require.

Sergey Poznyakoff authored 2010-09-18 00:28:16 +0300

* include/mailutils/smtp.h: New file.
* include/mailutils/Makefile.am (pkginclude_HEADERS): Add smtp.h.
* include/mailutils/list.h (mu_list_clear): New proto.
* include/mailutils/sys/smtp.h: New file.
* include/mailutils/sys/Makefile.am (sysinclude_HEADERS): Add smtp.h.
* libmailutils/errors (MU_ERR_BADREPLY, MU_ERR_SEQ): New error codes.
* libmailutils/list.c (mu_list_clear): New function.
* libproto/mailer/Makefile.am (libmu_mailer_la_SOURCES): Add new sources.
* libproto/mailer/smtp_capa.c: New file.
* libproto/mailer/smtp_carrier.c: New file.
* libproto/mailer/smtp_create.c: New file.
* libproto/mailer/smtp_disconnect.c: New file.
* libproto/mailer/smtp_domain.c: New file.
* libproto/mailer/smtp_ehlo.c: New file.
* libproto/mailer/smtp_io.c: New file.
* libproto/mailer/smtp_open.c: New file.
* libproto/mailer/smtp_starttls.c: New file.
* libproto/mailer/smtp_trace.c: New file.
* testsuite/smtpsend.c: New file.
* testsuite/Makefile.am (noinst_PROGRAMS): Add smtpsend.

Sergey Poznyakoff authored 2010-09-17 22:45:45 +0300

* bootstrap.conf: Build included listings in doc/texinfo.
* configure.ac: Require gettext 0.18
* doc/texinfo/Makefile.am: Remove the .c.inc rules.
* doc/texinfo/maint.mk: New file.
* lib/Makefile.am (libmuaux_la_SOURCES): Replace with libmuaux_a_SOURCES.

Sergey Poznyakoff authored 2010-09-17 19:05:06 +0300

Git does not keep empty subdirectories, so we need to recreate /cur and
/tmp subdirs in maildir mailboxes retrieved from the repo.

* bootstrap.conf: Recreate missing maildir parts.
* testsuite/testsuite.inc (MUT_MBCOPY): New macro.
* sieve/tests/ext.at: Use MUT_MBCOPY to copy mailboxes.
* sieve/tests/redirect.at: Likewise.
* sieve/tests/reject.at: Likewise.
* sieve/tests/testsuite.at: Likewise.
* testsuite/mbdel.at: Likewise.
* frm/tests/Makefile.am: Testsuite depends on
$(top_srcdir)/testsuite/testsuite.inc.
* libmailutils/tests/Makefile.am: Likewise.
* messages/tests/Makefile.am: Likewise.
* readmsg/tests/Makefile.am: Likewise.
* sieve/tests/Makefile.am: Likewise.
* testsuite/Makefile.am: Likewise.

Sergey Poznyakoff authored 2010-09-17 13:49:46 +0300

That's the first commit since the merge six days ago that passes
distcheck (with python, cxx, imap and nntp disabled, of course).

* testsuite/folder/DISTFILES: Restore. It is needed for some
of the remaining DejaGNU tests.
* testsuite/spool/DISTFILES: Likewise.
* testsuite/testsuite.at: New file.
* testsuite/atlocal.in: New file.
* libmailutils/tests/mbdel.at: Move to testsuite/.
* libmailutils/tests/mbdel.c: Likewise.
* libmailutils/tests/mime.at: Likewise.
* libmailutils/tests/mimetest.c: Likewise.

* Makefile.am (SUBDIRS): Place testsuite after libproto.
* configure.ac (AM_INIT_AUTOMAKE): Remove dist-lzma.
(AC_CONFIG_FILES): Add testsuite/atlocal.
* libmailutils/base64.c (_base64_decoder)
(_base64_encoder): Fix the use of uninitialized variables.
* libmailutils/tests/.gitignore: Remove mbdel and mimetest.
* libmailutils/tests/Makefile.am (noinst_PROGRAMS): Remove mbdel and mimetest.
(LDADD): Leave only MU_LIB_MAILUTILS.
(TESTSUITE_AT): Remove mbdel.at and mime.at
* libmailutils/tests/atlocal.in (PATH): Bugfix.
* libmailutils/tests/testsuite.at: Remove inclusion of mbdel.at and mime.at.
* po/POTFILES.in: Replace mailbox/ with libmailutils/.

* testsuite/.gitignore: Rewrite.
* testsuite/Makefile.am: Rewrite.
* testsuite/mbdel.at: Set +w on all copied mailboxes.
* testsuite/mimetest.c (main): Open mailbox for reading only.

* sieve/Makefile.am: Add examples/ to the distribution.

* libproto/mbox/mbox.c (mbox_open): Create locker only
if the mailbox is open for modification.
All users updated to check for mailbox->locker!=NULL before
using it.

Sergey Poznyakoff authored 2010-09-17 00:48:07 +0300

* libmailutils/tests/mbdel.at: New testcase.
* libmailutils/tests/Makefile.am (TESTSUITE_AT): Add mbdel.at.
* libmailutils/tests/testsuite.at: Include mbdel.at.
* libproto/mbox/mbox.c (mbox_remove): Fix return code.

* testsuite/maildir/mbox1: New test mailbox.
* testsuite/mh/mbox1: New test mailbox.
* testsuite/etc/DISTFILES: Remove.
* testsuite/folder/DISTFILES: Remove.
* testsuite/lib/DISTFILES: Remove.
* testsuite/Makefile.am: Use EXTRA_DIST to distribute
subdirs.

Sergey Poznyakoff authored 2010-09-16 12:53:52 +0300

* libmailutils/mailbox.c (mu_mailbox_open): Return MU_ERR_OPEN
if the mailbox has already been opened.

Sergey Poznyakoff authored 2010-09-16 02:10:13 +0300

* include/mailutils/mailbox.h (mu_mailbox_remove): New function.
* include/mailutils/stream.h: Add some comments.
* include/mailutils/sys/amd.h (_amd_data)<remove>: New method.
(amd_remove_dir): New function.
* include/mailutils/sys/mailbox.h (_mu_mailbox)<_remove>: New
method.
* libmailutils/amd.c (amd_remove_mbox): New function.
(amd_init_mailbox): Initialize the _remove method.
(amd_remove_dir): New function.
* libmailutils/errors (MU_ERR_MBX_REMOVED)
(MU_ERR_NOT_OPEN, MU_ERR_OPEN): New error codes.
* libmailutils/mailbox.c: Keep state of the mailbox (open vs. not
open, removed). Check it before doing anything on it.
(_MU_MAILBOX_OPEN, _MU_MAILBOX_REMOVED, _MU_MAILBOX_MASK): New
defines.
(mu_mailbox_open): Set _MU_MAILBOX_OPEN if the operation succeeds.
(mu_mailbox_close): Clear _MU_MAILBOX_OPEN if the operation succeeds.
Refuse to run if the mailbox was not opened.
(mu_mailbox_remove): New function.
(all functions): return MU_ERR_MBX_NULL if the mbox argument is
NULL.
Check mailbox state on entry and proceed accordingly.
* libproto/maildir/mbox.c: Implement _remove method.
(maildir_remove): New function.
(_mailbox_maildir_init): Initialize amd->_remove.
* libproto/mbox/mbox.c: Implement _remove method.
(mbox_remove): New function.
(_mailbox_mbox_init): Initialize amd->_remove.
* libproto/mh/mbox.c: Implement _remove method.
(mh_remove): New function.
(_mailbox_mh_init): Initialize amd->_remove.

* libmailutils/tests/mbdel.c: New file.
* libmailutils/tests/.gitignore: Add mbdel.
* libmailutils/tests/Makefile.am (noinst_PROGRAMS): Likewise.
(LDADD): List all mailbox formats.

* imap4d/delete.c (imap4d_delete): Use mu_mailbox_remove to
delete the folder.  Fall back to remove() if it does not appear
to be a mailbox.

Sergey Poznyakoff authored 2010-09-16 01:53:04 +0300

* examples/listop.c: Move to libmailutils/tests.
* examples/Makefile.am (noinst_PROGRAMS): Remove listop.
* libmailutils/tests/Makefile.am (noinst_PROGRAMS): Add listop.
(TESTSUITE_AT): Add list.at.
* libmailutils/tests/.gitignore: New file.
* libmailutils/tests/list.at: New file.
* libmailutils/tests/testsuite.at: Include list.at.

* libmailutils/list.c (list_itrctl): Fix mu_itrctl_replace.

Sergey Poznyakoff authored 2010-09-15 16:52:54 +0300

* libmailutils/tests/testsuite.at (MU_TEST_GROUP)
(MU_TEST_KEYWORDS, MU_TEST_COMMAND): New defines.
(mu_trimstr, mu_firstline): New macros.
(MU_GENERIC_TEST): New macro.
* libmailutils/tests/addr.c: Accept addresses from stdin.
* libmailutils/tests/address.at (TESTADDR): If the address
contains single quotes, pass it to the program via stdin.
Uncomment all such tests.
* libmailutils/tests/argcv.at (TESTARGS): Rewrite as a wrapper
over MU_GENERIC_TEST.
* libmailutils/tests/decode2047.at (TESTDEC2047): Likewise.
* libmailutils/tests/mailcap.at (MAILCAP): Likewise.
* libmailutils/tests/url.at (TESTURL): Likewise.
* libmailutils/tests/mailcap.c: Accept data from stdin.

Sergey Poznyakoff authored 2010-09-15 16:52:47 +0300

* libmailutils/Makefile.am (SUBDIRS): Make sure tests are descended
into only when the libmailutils library is already built.

Sergey Poznyakoff authored 2010-09-15 01:42:10 +0300

* configure.ac: Remove messages/testsuite
* messages/Makefile.am (SUBDIRS): Replace testsuite with tests.
* messages/tests/.gitignore: New file.
* messages/tests/Makefile.am: New file.
* messages/tests/atlocal.in: New file.
* messages/tests/testsuite.at: New file.
* messages/testsuite: Remove.

Sergey Poznyakoff authored 2010-09-15 01:08:00 +0300

* configure.ac: Create libmailutils/tests/atlocal and
libmailutils/tests/Makefile. Remove libmailutils/testsuite.
* examples/Makefile.am (noinst_PROGRAMS): Remove programs moved
to libmailutils/tests.
* examples/argcv.c -> libmailutils/tests/argcv.c
* libmailutils/testsuite/Decode -> libmailutils/tests/Decode
* libmailutils/testsuite/Encode -> libmailutils/tests/Encode
* examples/decode2047.c: Move to libmailutils/tests
* examples/encode2047.c: Move to libmailutils/tests
* examples/mailcap.c: Likewise.
* examples/url-parse.c: Likewise.

* include/mailutils/Makefile.am: Minor changes.
* libmailutils/Makefile.am (SUBDIRS): Replace testsuite with tests.
* libmailutils/tests/Makefile.am: New file.
* libmailutils/tests/addr.c: New file.
* libmailutils/tests/address.at: New file.
* libmailutils/tests/argcv.at: New file.
* libmailutils/tests/atlocal.in: New file.
* libmailutils/tests/base64d.at: New file.
* libmailutils/tests/base64e.at: New file.
* libmailutils/tests/decode2047.at: New file.
* libmailutils/tests/encode2047.at: New file.
* libmailutils/tests/fltst.c: New file.
* libmailutils/tests/mailcap.at: New file.
* libmailutils/tests/mime.at: New file.
* libmailutils/tests/testsuite.at: New file.
* libmailutils/tests/url.at: New file.

* libmailutils/testsuite/: Delete.

* frm/tests/Makefile.am: Prefix package.m4 creation commands with $(AM_V_GEN).
* readmsg/tests/Makefile.am: Likewise.
* sieve/tests/Makefile.am: Likewise.
* frm/tests/testsuite.at: Minor changes.
* readmsg/tests/testsuite.at: Include testsuite.inc.
* sieve/tests/testsuite.at: Likewise.
* sieve/tests/version.at: Comment out inclusion of testsuite.inc.
* testsuite/testsuite.inc: Add m4_version_prereq.

Sergey Poznyakoff authored 2010-09-15 00:48:22 +0300

This change has been waiting since 2005-08-16 (aaab8814),
when libmailbox had been renamed to libmailutils.  Back then MU
was still under CVS, which didn't like renames.

Sergey Poznyakoff authored 2010-09-14 15:01:52 +0300

* configure.ac: Add readmsg/tests/
* readmsg/Makefile.am: New file.
* readmsg/tests/.gitignore: New file.
* readmsg/tests/Makefile.am: New file.
* readmsg/tests/all.at: New file.
* readmsg/tests/atlocal.in: New file.
* readmsg/tests/hdr.at: New file.
* readmsg/tests/nohdr.at: New file.
* readmsg/tests/testsuite.at: New file.
* readmsg/tests/twomsg.at: New file.
* readmsg/tests/weed.at: New file.
* readmsg/testsuite: Remove.
* testsuite/testsuite.inc (AT_SKIP_TEST): New macro.

* testsuite/spool/mbox1: Remove trailing whitespace after Received headers.
* imap4d/testsuite/imap4d/fetch.exp: Reflece changes in mbox1.
* mail/testsuite/mail/read.exp: Likewise.
* mail/testsuite/mail/write.exp: Likewise.
* mailbox/testsuite/Mime: Likewise.

Sergey Poznyakoff authored 2010-09-14 12:26:12 +0300

* configure.ac: Build frm/testsuite/Makefile.am and atlocal.
Remove frm/testsuite/Makefile.
* testsuite/testsuite.inc: New file.

* frm/testsuite: Remove DejaGNU-based testsuite.
* frm/tests: Autotest-based testsuite.
* frm/tests/.gitignore
* frm/tests/Makefile.am
* frm/tests/atlocal.in
* frm/tests/testsuite.at

* frm/Makefile.am (SUBDIRS): Replace testsuite with tests.

* sieve/tests/Makefile.am (TESTSUITE): Add an include option.
* sieve/tests/version.at: Use macro from testsuite.inc.

Sergey Poznyakoff authored 2010-09-14 11:11:24 +0300

* sieve/examples/INBOX.orig
* sieve/examples/Test
* sieve/examples/test.out

Sergey Poznyakoff authored 2010-09-14 02:39:47 +0300

* mailbox/cfg_parser.y (mu_cfg_create_subtree): Optional prefix
character may be used to alter the separator or to suppress
value splitting.

Sergey Poznyakoff authored 2010-09-14 02:33:49 +0300

* include/mailutils/sys/stream.h (_MU_STR_EVENT_SET): Rename
to _MU_STR_EVENT_SET.
(_MU_STR_EVENT_CLR): Rename to _MU_STR_EVENT_CLRFLAG.
(_MU_STR_EVENT_FILLBUF, _MU_STR_EVENT_FLUSHBUF): New event codes.
(_MU_STR_EVMASK): New macro.
(_mu_stream) <cur>: Replace with pos, indicating current position
in the buffer.
(event_cb): Change signature.
(mu_stream_read_unbuffered): Remove.
(mu_stream_write_unbuffered): Remove.

* mailbox/iostream.c (mu_iostream_create): Provide the readdelim method
only if the underlying input transpor stream provides it.
* mailbox/streamref.c (mu_streamref_create_abridged): Likewise.

* mailbox/stream.c (_stream_event): New macro.
(mu_stream_read_unbuffered): Rename to static _stream_read_unbuffered.
(mu_stream_write_unbuffered): Rename to static _stream_write_unbuffered.
(_stream_advance_buffer, _stream_buffer_offset)
(_stream_orig_level): Remove macros.
(_stream_buffer_freespace): Rewrite.
(_stream_curp): New macro.
(_stream_fill_buffer): Make sure the `offset' indicates the offset
int the transport, corresponding to the beginning of the current
buffer.
(_stream_flush_buffer): Essentially rewritten.
(mu_stream_seek): Reflect changes to the _mu_stream structure. Optimize
calls to the seek method.
(_stream_skip_input_bytes): Likewise.
(mu_stream_read, _stream_scandelim, mu_stream_write): Rewrite using
new _mu_stream structure.

* mailbox/xscript-stream.c: Rewrite using stream events.

* mailbox/base64.c (_base64_encoder): Bugfix.

* libproto/pop/pop3_stream.c (_pop3_event_cb): Update signature to
match the changes above.
* examples/mimetest.c (main): Add more error checking.
* mail/testsuite/mail/write.exp: Minor fix.

Sergey Poznyakoff authored 2010-09-13 21:16:34 +0300

* imap4d/quota.c: New file.
* imap4d/Makefile.am (imap4d_SOURCES): Add quota.c
* imap4d/append.c (imap4d_append0): Refuse to append if
the quota is exceeded or would be exceeded after completing
the operation.
* imap4d/copy.c (imap4d_copy0): Refuse to copy messages if
the quota is exceeded or would be exceeded after completing
the operation.
Return a meaningful textual description.
Attempt to restore mailbox to its original size if the operation failed.
* imap4d/imap4d.c (imap4d_session_setup0): Call quota_setup.
* imap4d/imap4d.h (quota_setup, quota_check, quota_update): New functions.

* include/mailutils/folder.h (mu_list_response) <format>: New member.
* include/mailutils/mailbox.h (mu_mailbox_create_from_record): New
function.
* include/mailutils/types.hin (MU_FOLDER_ATTRIBUTE_LINK): New flag.
* libproto/mbox/folder.c (list_helper): Do not return symbolic links
unless MU_FOLDER_ATTRIBUTE_LINK is set.
Fill in the resp->format member.
* mailbox/mailbox.c (_mailbox_create_from_record): New static function.
(_create_mailbox0): Rewrite as a wrapper over _mailbox_create_from_record.
(mu_mailbox_create_from_record): New function.

Sergey Poznyakoff authored 2010-09-12 18:44:59 +0300

* movemail/movemail.c (guess_mbox_owner): Fix setting GID
with --owner=set-id.
(main): Don't attempt to expunge source mailbox if preserve_mail
is set.

Sergey Poznyakoff authored 2010-09-12 18:42:49 +0300

* mailbox/amd.c (read_size_file): Fix return value.

Sergey Poznyakoff authored 2010-09-12 18:42:02 +0300

* libproto/pop/pop3_stream.c (_pop3_event_cb)
(mu_pop3_filter_create): Fix buffer size manipulation.
* libmu_auth/tls.c: Protect gnutls debugging code with
DEBUG_TLS.

Sergey Poznyakoff authored 2010-09-12 00:35:17 +0300

As a side note, previous versions of pop3d did not do
byte-stuffing when sending RETR output.  This commit fixes
it.

* include/mailutils/filter.h (mu_dot_filter): New filter.
* mailbox/dot.c: New file.
* mailbox/Makefile.am (libmailutils_la_SOURCES): Add dot.c
* mailbox/crlfdot.c (_crlfdot_encoder): Bugfix. Do not
dereference iobuf until we know it is not NULL.
* mailbox/filter.c (mu_filter_get_list): Register mu_dot_filter.
* mailbox/fltstream.c (filter_wr_close, filter_rd_close): New
close methods, depending on the filter stream mode.
(mu_filter_stream_create): Set filter_rd_close for MU_STREAM_READ
and filter_wr_close for MU_STREAM_WRITE streams.
* mailbox/stream.c (mu_stream_readdelim): Update stream offset
when using stream->readdelim.

* pop3d/pop3d.h (pop3d_send_payload): New proto.
* pop3d/retr.c (pop3d_send_payload): Change function to be
optionally used in pop3d_top.  Use DOT filter on output.
* pop3d/top.c (pop3d_top): Rewrite using pop3d_send_payload.

* libproto/pop/pop3_retr.c (mu_pop3_retr): Default return
code is EINPROGRESS.
* libproto/pop/pop3_stream.c: Remove the filter stuff.
Use CRLFDOT instead.

* mailbox/amd.c (amd_body_stream_readdelim): Bugfix.  Increase
offset by nread bytes.

Sergey Poznyakoff authored 2010-09-11 20:56:52 +0300